This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen.
The certification ECU (smart key ECU assembly) controls the entry and start system (for Entry Function) related items that are customizable via the navigation system vehicle customization screen.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15F7 | Certification ECU Vehicle Information Reading/Writing Process Malfunction | Certification ECU (smart key ECU assembly) vehicle setting processing malfunction | ·
CAN communication system ·
Entry and start system (for Entry Function) ·
Certification ECU (smart key ECU assembly) ·
Radio and display receiver assembly |
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio and display receiver assembly may not operate normally.
Before replacing the certification ECU (smart key ECU assembly), refer to Registration.
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Use the GTS to check if the CAN communication system is functioning normally.
CAN communication DTCs are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check if the entry and start system is malfunctioning.
Customization may not be possible depending on the malfunction in the entry and start system.
No malfunctions are present in the entry and start system.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Make a note of the customizable items for the certification ECU (smart key ECU assembly) related system.
The items shown as customizable via the navigation system vehicle customization screen can also be changed using the GTS. In the following step, the GTS will be used.
To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the entry and start system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen.
Using the GTS, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.
The items available for customization via the navigation system vehicle customization screen can be customized successfully using the GTS.
| Proceed to |
|---|
| OK |
| NG |
OK
NG