When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio and display receiver assembly may not operate normally.
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Check that the voice guidance setting is not off.
Voice guidance setting is not off.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check that sound can be heard from a front speaker.
Sound can be heard.
| Proceed to |
|---|
| OK |
| NG |
OK
NG