RM35X0E _54 Brake _078667 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0385049 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ VSC OFF Switch) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ VSC OFF Switch)  C050024  Left Front Wheel Speed Sensor Signal Stuck High  C050624  Right Front Wheel Speed Sensor Signal Stuck High  


DESCRIPTION

Refer to DTC C050012

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ VSC OFF Switch)>C050012

DTC No. Detection Item DTC Detection Condition Trouble Area
C050024 Left Front Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more. Front speed sensor LH
C050624 Right Front Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more. Front speed sensor RH

CAUTION / NOTICE / HINT

NOTICE:

After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ VSC OFF Switch)>TEST MODE PROCEDURE


PROCEDURE

1.REPLACE FRONT SPEED SENSOR
a.

Replace the front speed sensor.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>FRONT SPEED SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END