RM35X0E _54 Brake _078667 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0381525 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

The front speed sensor rotor is a component of the front axle hub sub-assembly. If the front speed sensor rotor is malfunctioning, replace the front axle hub sub-assembly.



PROCEDURE

Hide 89543 2.REMOVE FRONT SPEED SENSOR LH

a.
C410834

Disconnect the connector and detach the clamp.


b.

Detach the 2 clamps to separate the front speed sensor LH from the vehicle body.


c.
C410835

Detach the 2 clamps to separate the front speed sensor LH from the vehicle body.


d.

Remove the 2 bolts and separate the front speed sensor LH.

C412604


e.
C410837

Detach the clamp to separate the front speed sensor LH from the front shock absorber assembly.


f.

Remove the bolt and front speed sensor LH from the front axle assembly LH.

NOTICE:
·

Keep the tip of the front speed sensor and installation hole free of foreign matter.

·

Do not rotate or apply excessive force to the front speed sensor when removing it from the steering knuckle. Rotating or applying excessive force may result in damage to the front speed sensor.