RM35X0E _51 Engine / Hybrid System _078884 CRUISE CONTROL _0383152 FRONT RADAR SENSOR SYSTEM C

CRUISE CONTROL  FRONT RADAR SENSOR SYSTEM  U030557  Software Incompatibility with Cruise Control Module Invalid/Incompatible Software Component  


DESCRIPTION

The millimeter wave radar sensor assembly receives vehicle information from the forward recognition camera via CAN communication.

If the vehicle information stored in the forward recognition camera differs from that stored in the millimeter wave radar sensor assembly, the millimeter wave radar sensor assembly stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area
U030557 Software Incompatibility with Cruise Control Module Invalid/Incompatible Software Component When the ignition switch is ON, the vehicle information stored in the millimeter wave radar sensor assembly differs from that received from the forward recognition camera
·

Millimeter wave radar sensor assembly

·

Forward recognition camera



CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle and a DTC may be stored.

·

When the millimeter wave radar sensor assembly is replaced, be sure to adjust the millimeter wave radar sensor assembly beam axis, perform front radar acceleration sensor calibration, and clear the vehicle control history for each system.

Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT

·

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.

·

If the forward recognition camera has been replaced with a new one, forward recognition camera adjustment must be performed.

HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)

Sequential Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)




PROCEDURE

1.CHECK FOR DTCs
a.

Check for DTCs.

Body Electrical > Front Radar Sensor > Trouble Codes
50001 429
Chassis > Front Recognition Camera > Trouble Codes
50001 430

Result:
Result Proceed to
DTC U030557 (Front Radar Sensor) and U032257 (Front Recognition Camera) are output A
Only DTC U030557 (Front Radar Sensor) is output B



A

B