RM35X0E _56 Audio / Visual / Telematics _078379 NAVIGATION / MULTI INFO DISPLAY _0380999 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY NAVIGATION SYSTEM Disc cannot be Ejected

CAUTION / NOTICE / HINT

NOTICE:: When replacing the radio and display receiver assembly, always replace it with a new one.; If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:; ·

A communication malfunction DTC may be stored.

·

The radio and display receiver assembly may not operate normally.

HINT:: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.; Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION201902,201906,_56,_078379,_0380999,RM100000001FWS5,201906,202107,_56,_078379,_0380999,RM100000001IFZS,202107,999999,_56,_078379,_0380999,RM100000001Y0KV,

1.CHECK OPERATION

Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.

Result:

Proceed to
OK
NG

2.REPLACE DISC AND RECHECK

REPLACE RADIO & DISPLAY RECEIVER ASSEMBLY

2.REPLACE DISC AND RECHECK

Replace the disc with a known good one and check that the malfunction disappears.

Result:

Proceed to
OK
NG

END (DISC IS DEFECTIVE)

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY