DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System)  OPERATION CHECK  

Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.

HINT:

·

If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.

·

If the switch is held, the transmitter LED illuminates repeatedly.

Check that all doors lock when the lock switch is pressed.

Check that all doors unlock when the unlock switch is pressed.*1

Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 5 seconds.*2

With the back door unlocked, when the back door open switch is pressed and held for 0.8 seconds or more, check that the back door opens.*3

HINT:

When "Wireless Unlock Twice Function" is set to "Enable" by performing customization using the GTS, only the driver door unlocks on the first unlock switch operation, and all doors unlock on the second unlock switch operation. (The default setting is "Disable".)

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Entry and Start System)>CUSTOMIZE PARAMETERS202201,999999,_58,_115226,_0510941,RM1000000020BTG,

Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, check that the corresponding operation is carried out.

Check that all of the doors attempt to automatically lock 1 second after the lock switch has been pressed while the driver door control knob is being held in the unlock position.

Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.

When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.

When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*1

When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*2

Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 30 seconds of all doors being unlocked by pressing the unlock switch.

Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.

HINT:

The doors can be unlocked even when a door is open or ajar.

Check that the doors lock after the back door is closed when the lock switch is pressed during the back door closing operation via the power back door function.