RM38T0EC _56 Audio / Visual / Telematics _111969 PARK ASSIST / MONITORING _0587004 PANORAMIC VIEW MONITOR SYSTEM(Production Date from 2023/04) Y

PARK ASSIST / MONITORING PANORAMIC VIEW MONITOR SYSTEM(Production Date from 2023/04) HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

HINT:: ·

Use the following procedure to troubleshoot the panoramic view monitor system.

·

*: Use the GTS.

PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP

Result:

Proceed to
NEXT

2.CUSTOMER PROBLEM ANALYSIS

Ask the customer about the problems and the conditions at the time the malfunction occurred to make sure the problem symptom was not temporarily caused by radio waves in the surrounding environment.

HINT:

The panoramic view monitor display may be temporarily distorted due to radio waves around the vehicle.

Problem Symptom	Cause
The problem symptom indicates a panoramic view monitor display malfunction and the problem symptom cannot be reproduced.	The display may be temporarily distorted when the vehicle is close to an object that transmits radio waves, such as a telecommunication tower, an airport or a truck equipped with a transceiver.

Result:

Proceed to
NEXT

3.INSPECT BATTERY VOLTAGE

Measure the battery voltage.

Standard voltage:: 11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

Result:

Proceed to
NEXT

4.CHECK NAVIGATION SYSTEM

Refer to the navigation system.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (Production Date from 2023/04)>PROBLEM SYMPTOMS TABLE202307,999999,_56,_111967,_0588532,RM100000002CO4G,

Result:

Result	Proceed to
Navigation system is normal	A
Navigation system is abnormal	B

5.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

GO TO NAVIGATION SYSTEM

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (Production Date from 2023/04)>HOW TO PROCEED WITH TROUBLESHOOTING202307,999999,_56,_111967,_0588532,RM100000002BKYF,

5.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

Use the GTS to check if the CAN communication system is functioning normally.

for HEV Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HEV Model)>DIAGNOSIS SYSTEM202307,999999,_57,_104409,_0606038,RM100000002C0LE,

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>DIAGNOSIS SYSTEM202307,999999,_57,_104409,_0605911,RM100000002C081,

Result:

Result	Proceed to
CAN DTCs are not output	A
CAN DTCs are output	B

6.CHECK FOR DTC*

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HEV Model)>HOW TO PROCEED WITH TROUBLESHOOTING202307,999999,_57,_104409,_0606038,RM100000002C0LC,

for HEV Model:

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING202307,202405,_57,_104409,_0605911,RM100000002C07Y,202405,999999,_57,_104409,_0605911,RM100000002NU3H,

6.CHECK FOR DTC*

Check for DTCs and note any codes that are output.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes: 50001 470

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs: 50002 470

Recheck for DTCs. Try to reproduce the problem symptoms based on the recorded DTCs, and then check if the DTCs are output again.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes: 50001 470

Result:

Result	Proceed to
DTC is not output	A
DTC is output	B

7.CHECK FOR VEHICLE CONTROL HISTORY (RoB)*

GO TO DIAGNOSTIC TROUBLE CODE CHART

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>DIAGNOSTIC TROUBLE CODE CHART202307,999999,_56,_111969,_0587004,RM100000002BWEK,

7.CHECK FOR VEHICLE CONTROL HISTORY (RoB)*

HINT:: Refer to Vehicle Control History (RoB).; Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>VEHICLE CONTROL HISTORY (RoB)202307,202405,_56,_111969,_0587004,RM100000002BWEM,202405,999999,_56,_111969,_0587004,RM100000002NRAE,

Check for vehicle control history (RoB) and note any codes that are output.

Chassis > Circumference Monitoring Camera Control Module > Utility

Tester Display
Vehicle Control History (RoB)

50005 470 55

Result:

Result	Proceed to
No vehicle control history (RoB) is output	A
Vehicle control history (RoB) is output	B

8.PROBLEM SYMPTOMS TABLE

GO TO VEHICLE CONTROL HISTORY (RoB)

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>VEHICLE CONTROL HISTORY (RoB)202307,202405,_56,_111969,_0587004,RM100000002BWEM,202405,999999,_56,_111969,_0587004,RM100000002NRAE,

8.PROBLEM SYMPTOMS TABLE

Refer to the Problem Symptoms Table.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>PROBLEM SYMPTOMS TABLE202307,999999,_56,_111969,_0587004,RM100000002BWEH,

Result:

Result	Proceed to
Fault is not listed in Problem Symptoms Table	A
Fault is listed in Problem Symptoms Table	B

9.OVERALL ANALYSIS AND TROUBLESHOOTING*

10.ADJUST, REPAIR OR REPLACE

9.OVERALL ANALYSIS AND TROUBLESHOOTING*

Data List / Active Test

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>DATA LIST / ACTIVE TEST202201,999999,_56,_111969,_0587004,RM1000000029RMR,

Terminals of ECU

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (Production Date from 2023/04)>TERMINALS OF ECU202307,999999,_56,_111969,_0587004,RM100000002CO5K,

Result:

Proceed to
NEXT

10.ADJUST, REPAIR OR REPLACE

Result:

Proceed to
NEXT

11.CONFIRMATION TEST

Result:

Proceed to
NEXT

END