| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | STEERING WHEEL ASSEMBLY | 45100 | - | - | - |
| 2 | LOWER STEERING COLUMN COVER | 45287 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0112,)
|
- | - |
| 3 | UPPER STEERING COLUMN COVER | 45286B | - | - | - |
| 4 | WINDSHIELD WIPER SWITCH ASSEMBLY | 84650 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0113,)
|
- | - |
| 5 | TURN SIGNAL SWITCH | 84329 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0092,)
|
- | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 6 | CONSOLE BOX ASSEMBLY | 58810J | - | - | - |
| 7 | FRONT DOOR SCUFF PLATE LH | 67914B | - | - | - |
| 8 | COWL SIDE TRIM SUB-ASSEMBLY LH | 62112A | - | - | - |
| 9 | FRONT DOOR OPENING TRIM WEATHERSTRIP LH | 62312B | - | - | - |
| 10 | NO. 1 INSTRUMENT SIDE PANEL | 55317E | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0010,)
|
- | - |
| 11 | HOOD LOCK CONTROL LEVER SUB-ASSEMBLY | 53601 | - | - | - |
| 12 | LOWER INSTRUMENT PANEL FINISH PANEL | 55432B | - | - | - |
| 13 | INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY | 55403F | - | - | - |
| 14 | CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY | 55405B | - | - | - |
| 15 | AIR CONDITIONING CONTROL ASSEMBLY | 55900 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0164,)
|
- | - |
| *A | for Electrical Control Type | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 16 | LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY | 73900 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0165,)
|
- | - |
| 17 | FRONT DOOR SCUFF PLATE RH | 67913B | - | - | - |
| 18 | COWL SIDE TRIM SUB-ASSEMBLY RH | 62111C | - | - | - |
| 19 | FRONT DOOR OPENING TRIM WEATHERSTRIP RH | 62311B | - | - | - |
| 20 | NO. 2 INSTRUMENT SIDE PANEL | 55318F | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0010,)
|
- | - |
| 21 | NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY | 55607 | - | - | - |
| 22 | LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY | 55406B | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0187,)
|
- | - |
| 23 | INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY | 55470 | - | - | - |
| 24 | CENTER INSTRUMENT PANEL SAFETY PAD RETAINER WITH NO. 2 HEATER CONTROL SUB-ASSEMBLY | - | - | - | - |
| 25 | CENTER INSTRUMENT PANEL REGISTER ASSEMBLY | 55670A | - | - | - |
| *A | for Mechanical Control Type | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 26 | RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET | - | - | - | - |
| 27 | GLOVE COMPARTMENT DOOR ASSEMBLY | 55550 | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0158,)
|
- | - |
| 28 | LOWER CENTER INSTRUMENT PANEL FINISH PANEL | 55434F | - | - | - |
| 29 | NO. 2 LOWER INSTRUMENT PANEL FINISH PANEL | 55433B | - | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 30 | FRONT PILLAR GARNISH ASSEMBLY LH | 62212B | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0174,)
|
- | - |
| 31 | FRONT PILLAR GARNISH ASSEMBLY RH | 62211U | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0174,)
|
- | - |
| 32 | NO. 1 INSTRUMENT PANEL SPEAKER PANEL | 55472C | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0144,)
|
- | - |
| 33 | NO. 2 INSTRUMENT PANEL SPEAKER PANEL | 55473B | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0144,)
|
- | - |
| 34 | NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY | 55011A | - | - | - |
| 35 | INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY | 55410C | - | - | - |
| 36 | CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL | 55413D | - | - | - |
| 37 | INSTRUMENT CLUSTER FINISH PANEL RETAINER | 55416C | - | - | - |
| 38 | COMBINATION METER ASSEMBLY | 83100 | - | - | - |
| 39 | NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH | 55475A | - | - | - |
| 40 | INSTRUMENT CLUSTER FINISH PANEL GARNISH | 55474B | - | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 41 | INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY | - | ( 202307,999999,_58,_112291,_0501085,RM100000002BHCD_01_0037,)
|
- | - |
When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
| Effect/Inoperative Function When Necessary Procedures are not Performed | Necessary Procedures | Link |
|---|---|---|
|
*1: for Gasoline Model |
||
| Front camera system | Drive the vehicle straight ahead at 15 km/h (10 mph) or more for 1 second or more. | ( 202307,999999,_95,_112293,_0586709,RM100000002BSVY,)
|
| Stop and start system*1 | Drive the vehicle until stop and start control is permitted (approximately 5 to 60 minutes) | ( 202307,999999,_51,_115233,_0510781,RM100000002CS0B,)
|
Learning completes when vehicle is operated normally
| Effect/Inoperative Function When Necessary Procedures are not Performed | Necessary Procedures | Link |
|---|---|---|
| Power door lock control system
·
Back door opener |
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch. | ( 202201,999999,_58,_115226,_0510939,RM1000000020BSY,)
|
| Power back door system | Fully close the back door by hand.
|
( 202201,999999,_59,_113746,_0504731,RM100000001ZJKP,)
|
| Air conditioning system | After the ignition switch is turned to ON, the servo motor standard position is recognized. | - |
45100
1.REMOVE STEERING WHEEL ASSEMBLY
45287
2.REMOVE LOWER STEERING COLUMN COVER
45286B
3.REMOVE UPPER STEERING COLUMN COVER
84650
4.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
84329
5.REMOVE TURN SIGNAL SWITCH
58810J
6.REMOVE CONSOLE BOX ASSEMBLY
67914B
7.REMOVE FRONT DOOR SCUFF PLATE LH
62112A
8.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
62312B
9.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
55317E
10.REMOVE NO. 1 INSTRUMENT SIDE PANEL
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a moulding remover B, disengage the clips and guides to remove the No. 1 instrument side panel as shown in the illustration.
53601
11.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55432B
12.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
The illustrations are representative examples, and details may differ.
|
Remove in this Direction | - | - |
55403F
13.REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
|
Remove in this Direction | - | - |
55405B
14.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
Remove in this Direction | - | - |
55900
15.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Electrical Control Type)
73900
16.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
67913B
17.REMOVE FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62111C
18.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
62311B
19.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
55318F
20.REMOVE NO. 2 INSTRUMENT SIDE PANEL
Use the same procedure as for the No. 1 instrument side panel.
55607
21.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
55406B
22.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Mechanical Control Type)
55470
23.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
|
Remove in this Direction | - | - |
24.REMOVE CENTER INSTRUMENT PANEL SAFETY PAD RETAINER WITH NO. 2 HEATER CONTROL SUB-ASSEMBLY (for Mechanical Control Type)
55670A
25.REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
| *A | for TFTM Made | *B | for GTMC Made |
|
Remove in this Direction | - | - |
26.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
55550
27.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
| *1 | Glove Compartment Door Stopper Sub-assembly | - | - |
| *a | Stopper | *b | Closed |
| *c | Open Approximately 57° | - | - |
|
Slightly Bend |
|
Open in this Direction |
|
Remove in this Direction | - | - |
Disengage the claw to separate the glove compartment door stopper sub-assembly.
Slightly bend the stoppers in the directions indicated by the arrows in the illustration and open the glove compartment door assembly until the stoppers are released as shown in the illustration.
Open the glove compartment door assembly to approximately 57° from its closed position. Pull it horizontally to disengage the hinges and remove the glove compartment door assembly as shown in the illustration.
Pulling the glove compartment door assembly upward to remove it causes the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.
55434F
28.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
The illustrations are representative examples, and details may differ.
|
Remove in this Direction | - | - |
55433B
29.REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
|
Remove in this Direction | - | - |
62212B
30.REMOVE FRONT PILLAR GARNISH ASSEMBLY LH
62211U
31.REMOVE FRONT PILLAR GARNISH ASSEMBLY RH
Use the same procedure as for the LH side.
55472C
32.REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL
| *A | w/ Speaker | - | - |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a moulding remover A, disengage the clips and guides to remove the No. 1 instrument panel speaker panel as shown in the illustration.
w/ Speaker:
1. Disconnect the connector.
55473B
33.REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL
Use the same procedure as for the No. 1 instrument panel speaker panel.
55011A
34.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
|
Remove in this Direction | - | - |
55410C
35.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55413D
36.REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
| *A | w/ Smart Entry and Start System | - | - |
|
Remove in this Direction | - | - |
55416C
37.REMOVE INSTRUMENT CLUSTER FINISH PANEL RETAINER
|
Remove in this Direction | - | - |
83100
38.REMOVE COMBINATION METER ASSEMBLY
55475A
39.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
Remove in this Direction | - | - |
55474B
40.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
Remove in this Direction | - | - |
41.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
| *a | Airbag Connector | *b | Cooler Thermistor (Room Temperature Sensor) |
Remove the bolt <B>.
Disconnect the connector.
Disconnect the airbag connector.
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
Refer to How to Connect or Disconnect Airbag Connector:
Disengage the claws to disconnect the cooler thermistor (room temperature sensor).
Disengage the clamps.
Disconnect the connector.
w/ Digital Key System or Ion Generator:
| *A | w/ Digital Key System | *B | w/ Ion Generator |
| *C | for TFTM Made | *D | for GTMC Made |
Disconnect each connector.
Remove the 2 clips.
Remove the 2 bolts <A>, 2 bolts <E> and 5 screws <C>.
|
Remove in this Direction | - | - |
Disengage the clamp.
Disconnect the 3 connectors.
Disengage the guides to remove the instrument panel safety pad sub-assembly as shown in the illustration.
Do not damage the instrument panel safety pad sub-assembly.
Do not allow the wire harnesses to interfere with the surrounding parts.