RM36D0EC _54 Brake _083077 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0402316 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model)  C050C24  Left Rear Wheel Speed Sensor Signal Stuck High  C051224  Right Rear Wheel Speed Sensor Signal Stuck High  


DESCRIPTION

Refer to DTC C050C12

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>C050C12

DTC No. Detection Item DTC Detection Condition Trouble Area
C050C24 Left Rear Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more.
·

Rear speed sensor LH (rear axle hub and bearing assembly LH)*1

·

Rear speed sensor LH*2


C051224 Right Rear Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more.
·

Rear speed sensor RH (rear axle hub and bearing assembly RH)*1

·

Rear speed sensor RH*2



*1: for 2WD

*2: for AWD

CAUTION / NOTICE / HINT

NOTICE:

After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>TEST MODE PROCEDURE


PROCEDURE

1.CHECK VEHICLE
a.

Check the vehicle specification.


Result:
Result Proceed to
for 2WD A
for AWD B



A

2.REPLACE REAR AXLE HUB AND BEARING ASSEMBLY

B

3.REPLACE REAR SPEED SENSOR
2.REPLACE REAR AXLE HUB AND BEARING ASSEMBLY
a.

Replace the rear axle hub and bearing assembly.

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB>REMOVAL


Result:
Proceed to
NEXT



NEXT

END

3.REPLACE REAR SPEED SENSOR
a.

Replace the rear speed sensor.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>REAR SPEED SENSOR (for AWD)>REMOVAL


Result:
Proceed to
NEXT



NEXT

END