RM36D0EC _52 Drivetrain _083068 GF2A TRANSFER / 4WD / AWD _0402928 4WD CONTROL ECU A

GF2A TRANSFER / 4WD / AWD  4WD CONTROL ECU  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the 4WD control ECU assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
4WD ECU assembly
·

ECU data save

·

ECU data initialization

·

ECU data write


Dynamic torque vectoring AWD system (Click here)

PROCEDURE

Hide 89630A 12.REMOVE 4WD ECU ASSEMBLY

C405126C01
0,0 0,0 false
V100135

Bolt
V100136

Connector


a.

Disconnect the connector.


b.

Remove the 2 bolts and 4WD ECU assembly.