AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER OIL SEAL  REPLACEMENT  

41110 1.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

52380 2.REMOVE REAR NO. 1 DIFFERENTIAL SUPPORT

52380C 3.REMOVE REAR NO. 2 DIFFERENTIAL SUPPORT

41330D 4.REMOVE TRANSMISSION COUPLING ASSEMBLY

41330E 5.REMOVE TRANSMISSION COUPLING CONICAL SPRING WASHER

41330J 6.REMOVE TRANSMISSION COUPLING SHIM

7.REMOVE DIAPHRAGM OIL SEAL

a.

0.458,0.271 0.802,0.625 false 2.406,1.625 2.104,0.583 2.104,0.583 2.302,0.583 false 1.365,0.729 1.542,0.885 0.177,0.156 10 *a 0.083,0.521 0.271,0.677 0.188,0.156 10 *b 0.302,0.104 0.677,0.26 0.375,0.156 10 SST 2.344,0.521 2.656,0.719 0.313,0.198 10 *1

*1	Diaphragm Oil Seal
*a	Turn
*b	Hold

Using SST, remove the diaphragm oil seal from the rear differential carrier sub-assembly.

SST

09308-10010  

8.INSTALL DIAPHRAGM OIL SEAL

a.

0.396,0.688 0.615,0.688 false 2.104,1.781 1.896,1.781 1.896,1.781 1.896,1.531 false 3.208,1.365 3.385,1.531 0.177,0.167 10 false *a 0.094,0.604 0.458,0.771 0.365,0.167 10 false SST 2.177,1.688 2.49,1.885 0.313,0.198 10 false *1

*1	Diaphragm Oil Seal
*a	Distance

Using SST and a hammer, tap a new diaphragm oil seal into the rear differential carrier sub-assembly until it reaches the standard value.

SST

09710-30021  (09710-03121)
09950-60011  (09951-00570)
09950-70010  (09951-07100)

Standard distance:

6.5 to 7.5 mm (0.256 to 0.295 in.) (from the edge of the differential carrier sub-assembly)

NOTICE:

·

Tap the oil seal uniformly so that the oil seal is straight.

·

Do not tap the oil seal in too far.

41330J 9.INSTALL TRANSMISSION COUPLING SHIM

41330E 10.INSTALL TRANSMISSION COUPLING CONICAL SPRING WASHER

41330D 11.INSTALL TRANSMISSION COUPLING ASSEMBLY

52380 12.INSTALL REAR NO. 1 DIFFERENTIAL SUPPORT

52380C 13.INSTALL REAR NO. 2 DIFFERENTIAL SUPPORT

41110 14.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY