☰ Toyota Venza☰ فهرستAudio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM
RM38N0EC
_56
Audio / Visual / Telematics
_111825
PARK ASSIST / MONITORING
_0524148
PARKING ASSIST MONITOR SYSTEM
U
PARK ASSIST / MONITORING PARKING ASSIST MONITOR SYSTEM TERMINALS OF ECU
REAR TELEVISION CAMERA ASSEMBLY
2.396,0.833 2.771,1.073
0.375,0.24
2.469,0.854 2.781,1.052
0.313,0.198
10
false
T23
a.
Disconnect the rear television camera assembly connector.
b.
Measure the voltage on the wire harness side connector according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| T23-4 (CB+) - T23-3 (CGND) | Power source | Ignition switch ACC | 6 to 9 V |
c.
Measure the resistance on the wire harness side connector according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| T23-1 (CANH) | CAN communication line | - | - |
| T23-2 (CANL) | CAN communication line | - | - |
| T23-3 (CGND) - Body ground | Camera ground | Always | Below 1 Ω |
| T23-5 (CV-) | Video signal | - | - |
| T23-6 (CV+) | Video signal | - | - |
| T23-7 (SGND) - Body ground | Camera ground (shield) | Always | Below 1 Ω |
NAVIGATION RECEIVER ASSEMBLY