RM38N0EC _51 Engine / Hybrid System _111788 M20C-FKS, M20D-FKS STARTING _0702411 STARTER(for 1.2 kW Type) A

M20C-FKS, M20D-FKS STARTING STARTER(for 1.2 kW Type) INSTALLATION

PROCEDURE

Hide Display 28100 1.INSTALL STARTER ASSEMBLY

Install the starter assembly to the cylinder block sub-assembly with the 2 bolts.

Torque:: 46 N*m (469 kgf*cm, 34 ft.*lbf)

Connect the No. 2 engine wire to terminal 30 with the nut.

Torque:: 9.8 N*m (100 kgf*cm, 87 in.*lbf)

Close the terminal cap.

Hide Display 11363A 2.INSTALL FLYWHEEL HOUSING SIDE COVER

Align the protrusion with the cylinder block sub-assembly and engage the claw as shown in the illustration to install the flywheel housing side cover.

NOTICE:: ·

Make sure the claw makes a click sound, indicating that it fits tightly.

·

Replace the flywheel housing side cover with a new one if the claw does not fit tightly or is deformed.

Hide Display 12361 3.INSTALL FRONT ENGINE MOUNTING INSULATOR

Click hereEngine / Hybrid System>M20C-FKS, M20D-FKS (ENGINE CONTROL)>ACTIVE CONTROL ENGINE MOUNT (for Front Side)>INSTALLATION202406,202409,_51,_111785,_0503269,RM100000002L4G1,202409,999999,_51,_111785,_0503269,RM100000002NYH4,

Hide Display 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>M20C-FKS, M20D-FKS BATTERY>INSTALLATION202111,999999,_V1,_112220,_0503321,RM100000001ZE56_01_0015,

Hide Display 5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE202406,999999,_V1,_111780,_0504976,RM100000002MNUE,

HINT:: When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202111,999999,_V1,_111780,_0504976,RM100000001ZKRU,