RM38N0EC _59 Vehicle Exterior _111831 DOOR / HATCH _0525498 KICK SENSOR A

DOOR / HATCH KICK SENSOR INSTALLATION

PROCEDURE

Hide Display 891B0 1.INSTALL KICK DOOR CONTROL SENSOR ASSEMBLY

Install the kick door control sensor assembly with the 5 clips.

Connect the connector.

NOTICE:: Do not touch the terminals of the kick door control sensor connector.

Hide Display 2.INSTALL REAR BUMPER ASSEMBLY

Hide Display 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for M20C-FKS, M20D-FKS:

for A25D-FXS, A25F-FXS:

Hide Display 4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:: When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202111,999999,_V1,_111780,_0504976,RM100000001ZKRU,

Hide Display 65351A 5.INSTALL BATTERY HOLE COVER (for HV Model)

Hide Display 58416K 6.INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)

Hide Display 891B2 7.INSPECT KICK DOOR CONTROL SENSOR