RM38N0EC _55 Steering _111820 STEERING COLUMN _0503156 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not remove/install the spiral cable with sensor sub-assembly with the auxiliary battery connected and the engine switch (for Gasoline Model) or power switch (for HV Model) on (IG).

·

Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed, with the auxiliary battery connected and the engine switch (for Gasoline Model) or power switch (for HV Model) on (IG).

·

Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.



PROCEDURE

Hide 2.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 4.INSTALL STEERING WHEEL ASSEMBLY

a.
C472822C01
1.708,1.042 0.729,1.052 0.729,1.052 1.708,1.083 true 0.51,0.958 0.708,1.177 0.198,0.219 10 true *a
*a Matchmark


Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.


b.

Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt.

Torque:
62 N*m (632 kgf*cm, 46 ft.*lbf)


c.

Connect each connector.


Hide 5.CHECK STEERING WHEEL CENTER POINT