The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during mobilephone battery removal/installation are shown below.
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
| Mobilephone battery | Reset mobilephone battery condition | Emergency call service | ( 202111,202303,_56,_111824,_0502894,RM100000001ZC5L,202303,202406,_56,_111824,_0502894,RM100000002B0Q3,202406,202409,_56,_111824,_0502894,RM100000002N7SD,202409,999999,_56,_111824,_0502894,RM100000002P6IS,)
|
2.REMOVE TELEMATICS TRANSCEIVER WITH BRACKET
86742A
3.REMOVE TRANSCEIVER COVER
Remove the screw.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 2 claws and 3 guides to remove the transceiver cover as shown in the illustration.
86725
4.REMOVE MOBILEPHONE BATTERY
Disconnect the connector.
Remove the mobilephone battery.