DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Lock Position Switch Status | Front door RH unlock detection switch signal | Lock or Unlock | Lock: Front door RH locked
Unlock: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch signal | Lock or Unlock | Lock: Front door LH locked
Unlock: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch signal | Lock or Unlock | Lock: Rear door RH locked
Unlock: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch signal | Lock or Unlock | Lock: Rear door LH locked
Unlock: Rear door LH unlocked |
- |
| Back Door Lock Position Status | Back door lock position signal | Lock or Unlock | Lock: Back door locked
Unlock: Back door unlocked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly (for RH) signal | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly (for LH) signal | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly (for RH) signal | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly (for LH) signal | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status | Back door courtesy switch signal | Close or Open | Close: Back door closed
Open: Back door open |
- |
| IGR Power | Ignition switch ON signal | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Panel Light Input Signal | Panel light input condition | OFF or ON | OFF: Light control switch not in tail position
ON: Light control switch in tail position |
- |
| Panel Light Output Signal | Panel light output condition | OFF or ON | OFF: Panel light off
ON: Panel light on |
- |
| Panel Light Output Current | Panel light current | Min.: 0, Max.: 255 A | Below 3.2 A | Panel light current when output is on |
| Panel Light Fuse Shut Off Status | Panel Light Fuse condition | OFF or ON | OFF: Fuse not shut off
ON: Fuse shut off |
- |
| Panel Light Fuse Shut Off Count | Panel light fuse shut off history | Min.: 0, Max.: 255 | Number of fuse shut off displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Start Switch Light Function | Setting for the function to turn on the push start switch illumination. | OFF or ON | Customize setting displayed | - |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | OFF or ON | Perform the Active Test with the door linked switch of the map light assembly on and switch of the No. 1 room light assembly in the off (DOOR) position. |
| Front Footwell Lights | ·
Footwell Light (Interior Illumination Light Assembly)*2 ·
Glove Box Light Assembly*2 ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)*2 ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*2 |
OFF or ON | Operates when ignition switch is off and all doors are locked. |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | OFF or ON | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on) ·
ON: DOME CUT relay off (interior lights turn off) |
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
*2: w/ Footwell Light
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Start SW Light Power Supply | Push start switch illumination | OFF or ON | - |