INSPECT ILLUMINATED ENTRY SYSTEM OPERATION
Perform this inspection with the customize settings set to their default setting.
Perform this inspection with the door linked switch of the map light assembly on and switch of the No. 1 room light assembly in the off (DOOR) position.
| Control | Condition | Lights that Operate |
|---|---|---|
| Actuation Area-linked | With the ignition switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
No. 1 Room Light Assembly ·
Footwell Light (Interior Illumination Light Assembly)* ·
Glove Box Light Assembly* ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)* ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)* |
| Door Lock/Unlock-linked | With the ignition switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
No. 1 Room Light Assembly ·
Footwell Light (Interior Illumination Light Assembly)* ·
Glove Box Light Assembly* ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)* ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)* |
| Door Open/Close-linked | With the ignition switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds. | ·
Map Light Assembly ·
No. 1 Room Light Assembly ·
Footwell Light (Interior Illumination Light Assembly)* ·
Glove Box Light Assembly* ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)* ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)* |
| With the ignition switch off and all of the doors closed, open any front door and check that the lights that operate turn on. While the lights that operate are on, close the front doors and check that the lights that operate turn off after approximately 40 seconds. | Push Start Switch Illumination | |
| With the ignition switch ON, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off. | ·
Map Light Assembly ·
No. 1 Room Light Assembly |
|
| Push Start Switch-linked | With all of the doors closed, turn the ignition switch from ACC or ON to off and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
No. 1 Room Light Assembly ·
Footwell Light (Interior Illumination Light Assembly)* ·
Glove Box Light Assembly* ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)* ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)* |
| Turn the ignition switch from ACC or ON to off and check that the lights that operate turn on for approximately 40 seconds and then turn off. | Push Start Switch Illumination | |
| Shift Position-linked | With the ignition switch ACC or ON, move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness. | ·
Footwell Light (Interior Illumination Light Assembly)* ·
Glove Box Light Assembly* ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)* ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)* |
*: w/ Footwell Light
INSPECT BATTERY SAVING CONTROL OPERATION
The operations and conditions of this control are described below.
| Control | Condition | Lights that Operate |
|---|---|---|
| Battery Saving | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Map Light Assembly ·
No. 1 Room Light Assembly ·
Footwell Light (Interior Illumination Light Assembly)*1 ·
Glove Box Light Assembly*1 ·
Center Tray Illumination Light (No. 3 Interior Illumination Light Assembly) ·
Console Box Illumination Light (Console Box Illumination Light Assembly)*1 ·
Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*1 ·
No. 1 Luggage Compartment Light Assembly ·
Vanity Light Assembly ·
Front Door Courtesy Light (Courtesy Light Assembly) ·
Scuff Light (Front Door Scuff Plate)*2 |
When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights that operate turn off.
|
Push Start Switch Illumination |
*1: w/ Footwell Light
*2: w/ Scuff Light