DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Lock Position Switch Status | Front door RH unlock detection switch signal | Unlock or Lock | Unlock: Front door LH unlocked
Lock: Front door LH locked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch signal | Unlock or Lock | Unlock: Front door RH unlocked
Lock: Front door RH locked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch signal | Unlock or Lock | Unlock: Rear door RH unlocked
Lock: Rear door RH locked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch signal | Unlock or Lock | Unlock: Rear door LH unlocked
Lock: Rear door LH locked |
- |
| Back Door Lock Position Status | Back door unlock detection switch signal | Unlock or Lock | Unlock: Back door unlocked
Lock: Back door locked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly RH signal | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly LH signal | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly RH signal | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly LH signal | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status | Back door courtesy light switch signal | Close or Open | Close: Back door closed
Open: Back door open |
- |
| IGR Power | Ignition switch ON signal | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Panel Light Input Signal | Panel light input condition | OFF or ON | OFF: Light control switch not in tail position
ON: Light control switch in tail position |
- |
| Panel Light Output Signal | Panel light output condition | OFF or ON | OFF: Light control switch not in tail or head position
ON: Light control switch in tail or head position |
- |
| Panel Light Output Current | Panel light current | Min.: 0, Max.: 255 A | Below 3.2 A | Panel light current when output is on |
| Panel Light Fuse Shut Off Status | Panel Light Fuse condition | OFF or ON | OFF: Fuse not shut off
ON: Fuse shut off |
- |
| Panel Light Fuse Shut Off Count | Panel light fuse shut off history | Min.: 0, Max.: 255 | Number of fuse shut off displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Start Switch Light Function | Setting for the function to turn on the push start switch illumination or cause it to blink. | OFF or ON | Customized setting displayed | w/ Smart Entry and Start System |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | OFF or ON | Perform the Active Test with the DOOR switch in the map light assembly, No. 1 room light assembly and transponder key coil*4 turned on. |
| Front Footwell Lights | Operation of the following lights:
·
No. 1 interior illumination light assembly LH (footwell light)*2 ·
No. 1 interior illumination light assembly RH (footwell light)*2 ·
Console box illumination light assembly (cup holder light) ·
No. 1 interior illumination light assembly (driver side tray light)*3 ·
Interior illumination light sub-assembly (front passenger side tray light)*3 ·
No. 1 interior illumination light assembly (center tray light)*3 |
OFF or ON | - |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | OFF or ON | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on) ·
ON: DOME CUT relay off (interior lights turn off) |
| Dimmer Signal | Outputs night mode (dimmer signal) | OFF or ON | - |
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
*2: w/ Footwell Light
*3: w/ Tray Light
*4: w/o Smart Entry and Start System
| Tester Display | Measurement Item | Control Range | Inspection Item |
|---|---|---|---|
| Start SW Light Power Supply | Push start switch illumination | OFF or ON | w/ Smart Entry and Start System |