RM36D0EC _58 Vehicle Interior _083104 HEATING / AIR CONDITIONING _0402828 AIR CONDITIONING SYSTEM(for Gasoline Model) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model)  P007011  Ambient Temperature Sensor Circuit Short to Ground  


DESCRIPTION

The thermistor assembly is installed in front of the cooler condenser assembly to detect the ambient temperature, which is used to control the air conditioning system. This sensor is connected to the combination meter assembly and detects fluctuations in the ambient temperature. This data is used for controlling the cabin temperature. The resistance of the thermistor assembly changes in accordance with the ambient temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies a voltage to the thermistor assembly and reads voltage changes due to changes in the resistance of the thermistor assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
P007011 Ambient Temperature Sensor Circuit Short to Ground
Diagnosis Condition:

Ignition switch ON


Malfunction Status:

Short in ambient temperature sensor circuit


Detection Time:

Continuously for 4 seconds or more


·

Thermistor assembly

·

Harness or connector

·

Air conditioning amplifier assembly


Memorized

WIRING DIAGRAM

E544599E03
4.646,1.906 5.104,2.104 0.458,0.198 10 false G47 4.656,2.083 7.01,2.406 2.354,0.323 10 false Air Conditioning Amplifier Assembly 4.844,0.729 5.302,0.927 0.458,0.198 10 false TAM 4.854,1.229 5.313,1.427 0.458,0.198 10 false SG-2 4.531,1.125 4.948,1.292 0.417,0.167 10 false 14 4.573,0.625 4.99,0.792 0.417,0.167 10 false 1 2.156,1.135 2.573,1.302 0.417,0.167 10 false 1 2.167,0.677 2.583,0.844 0.417,0.167 10 false 2 0.708,1.792 1.167,1.99 0.458,0.198 10 false A19 0.698,1.958 3.052,2.281 2.354,0.323 10 false Thermistor Assembly 1.875,0.656 2.333,0.854 0.458,0.198 10 false + 1.885,1.115 2.344,1.313 0.458,0.198 10 false -

PROCEDURE

1.READ VALUE USING GTS (CHECK FOR SHORT IN WIRE HARNESS)
a.
A226261C74
0.917,1.771 1.281,2 0.365,0.229 10 false *1 2.667,1.771 3.031,2 0.365,0.229 10 false *2 2,0.688 2.458,0.958 0.458,0.271 10 false TAM 1.917,1.031 2.438,1.271 0.521,0.24 10 false SG-2
*1 Thermistor Assembly
*2 Air Conditioning Amplifier Assembly


Disconnect the thermistor assembly connector.


b.

According to the display on the GTS, read the Data List.

Body Electrical > Air Conditioner > Data List
Tester Display
Ambient Temperature Sensor
50003 450 101
OK:
GTS Display Specified Condition
Ambient Temperature Sensor -327.68°C (-557.82°F)



Result:
Proceed to
OK
NG



OK

REPLACE THERMISTOR ASSEMBLY

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AMBIENT TEMPERATURE SENSOR>REMOVAL


NG

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - THERMISTOR ASSEMBLY)
2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - THERMISTOR ASSEMBLY)

Pre-procedure1

a.

Disconnect the G47 air conditioning amplifier assembly connector.


b.

Disconnect the A19 thermistor assembly connector.


Procedure1

c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G47-1 (TAM) or A19-2 (+) - Other terminals and body ground Always 10 kΩ or higher
G47-14 (SG-2) or A19-1 (-) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG


Post-procedure1

d.

None



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING AMPLIFIER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR