CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU), POWER DISTRIBUTION BOX ASSEMBLY
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
Connect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A-27 (IGR) - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| A-26 (BECU) - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| A-13 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| A-14 (GND2) - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| G168-27 (RET) - Body ground | Power retract mirror motor drive voltage (Input) | Auto retractable mirror switch on outer mirror switch assembly retracted position | Below 1 V |
| Auto retractable mirror switch on outer mirror switch assembly driving position | 11 to 14 V | ||
| G168-26 (AMR) - Body ground | Power retract mirror motor drive voltage (Input) | Auto retractable mirror switch on outer mirror switch assembly auto retracted position | Below 1 V |
| Auto retractable mirror switch on outer mirror switch assembly driving position | 11 to 14 V | ||
| 6B-2 - Body ground | Mirror heater drive voltage (output) | Window defogger switch (mirror heater switch) off | Below 1 V |
| Window defogger switch (mirror heater switch) on | 11 to 14 V | ||
| 6C-10 - Body ground | Power retract mirror motor drive voltage (Output) | Outer rear view mirror assembly moves to the retracted position | Below 1 V |
| Outer rear view mirror assembly does not move | 11 to 14 V | ||
| 6C-21 - Body ground | Power retract mirror motor drive voltage (Output) | Outer rear view mirror assembly moves to the return position. | Below 1 V |
| Outer rear view mirror assembly does not move. | 11 to 14 V |
Measure the pulse according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A-22 (CXP1) - Body ground | CXPI communication line | Ignition switch ON | Pulse generation |