89120A
1.INSTALL AUTOMATIC LIGHT CONTROL SENSOR
Attach the claw to install the automatic light control sensor.
|
Install in this Direction | - | - |
Connect the connector.
2.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
5. PERFORM DIAGNOSTIC SYSTEM CHECK
6.CHECK SRS WARNING LIGHT
7.PERFORM SYSTEM INITIALIZATION AND CALIBRATION
8.INSPECT AUTOMATIC LIGHT CONTROL SYSTEM