RM36D0EC _56 Audio / Visual / Telematics _083087 TELEMATICS _0402655 TELEMATICS SYSTEM D

TELEMATICS  TELEMATICS SYSTEM  VEHICLE CONTROL HISTORY  


NOTICE:

Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.


CHECK VEHICLE CONTROL HISTORY


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).

Body Electrical > Telematics > Utility
Tester Display
Vehicle Control History (RoB)
50005 459 55
Vehicle Control History Item
Code Tester Display Description Diagnostic Note
X2210 Life Cycle of DCM Backup Battery When the system detects that the mobilephone battery has reached the end of its lifespan.
·

The emergency call switch red indicator blinks

·

Replace telematics transceiver

(Click here)


X2211 Low DCM Backup Battery Charge When the mobilephone battery charge is low. -
X2601 Software Inconsistency with ENG/HV Control Module The VIN number received via CAN communication does not match that stored in the DCM.
·

The manual (SOS) switch red indicator blinks

·

X2212 Diagnostics Communication Flow Failure Diagnostics communication flow failure (ID, Mode/SID difference). -
X2213 Communication Blackout from Power Distribution Controller ECU Lost Communication with ECM Check CAN Communication System
for GTMC Made HV Model:(Click here)
for SFTM Made HV Model:(Click here)
for GTMC Made Gasoline Model:(Click here)
for SFTM Made Gasoline Model:(Click here)
X2215 Non Approval of the Reprograming User did not approve software update. -
X2216 Failure of the Reprogramming Software writing failed. -
X2217 Inconsistent Startup Software Software writing succeeded, but started software does not match package. -
X2218 Communication Blackout from Body Controller ECU Lost communication with main body ECU (multiplex network body ECU) Check CAN Communication System
for GTMC Made HV Model:(Click here)
for SFTM Made HV Model:(Click here)
for GTMC Made Gasoline Model:(Click here)
for SFTM Made Gasoline Model:(Click here)
X21D4 Reprograming Telematics ECU by OTA Start/Finish The software update of DCM by OTA is started and completed with success. The software update of DCM by OTA is started and completed with success.



CLEAR VEHICLE CONTROL HISTORY


NOTICE:

By performing this procedure, all stored Vehicle Control History will be cleared.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).

Body Electrical > Telematics > Utility
Tester Display
Vehicle Control History (RoB)
50005 459 55

e.

According to the display on the GTS, clear the Vehicle Control History (RoB).