RM36D0EC _58 Vehicle Interior _083103 SEAT BELT _0694953 SEAT BELT WARNING SYSTEM(for SFTM Made) Y

SEAT BELT SEAT BELT WARNING SYSTEM(for SFTM Made) HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

HINT:: ·

Use the following procedure to troubleshoot the seat belt warning system.

·

*: Use the GTS.

PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP

Result:

Proceed to
NEXT

2.CUSTOMER PROBLEM ANALYSIS

Interview the customer to confirm the problem.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING201910,999999,_V1,_083040,_0402301,RM100000001JHCA,

Result:

Proceed to
NEXT

3.PRE-CHECK

Measure the auxiliary battery voltage with the ignition switch off.

Standard voltage:: 11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

Check the fuses and relays.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

Result:

Proceed to
NEXT

4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

Using the GTS, check for CAN communication system DTCs.

for HV Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for SFTM Made HV Model)>DIAGNOSIS SYSTEM202405,999999,_57,_083091,_0694853,RM100000002LUHO,

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for SFTM Made Gasoline Model)>DIAGNOSIS SYSTEM202405,999999,_57,_083091,_0694854,RM100000002LVP6,

Result:

Result	Proceed to
CAN DTCs are not output	A
CAN DTCs are output	B

5.CHECK COMBINATION METER ASSEMBLY

GO TO CAN COMMUNICATION SYSTEM

for HV Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for SFTM Made HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING202405,202409,_57,_083091,_0694853,RM100000002LUHL,202409,999999,_57,_083091,_0694853,RM100000002NT0M,

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for SFTM Made Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING202405,202409,_57,_083091,_0694854,RM100000002LUIS,202409,999999,_57,_083091,_0694854,RM100000002NUBH,

5.CHECK COMBINATION METER ASSEMBLY

Check the operation of the speedometer and shift indicator on the combination meter assembly.

OK:: The speedometer and shift indicator on the combination meter assembly operate normally.

Result:

Proceed to
OK
NG

6.PROBLEM SYMPTOMS TABLE

GO TO METER / GAUGE SYSTEM

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for SFTM Made)>HOW TO PROCEED WITH TROUBLESHOOTING202405,999999,_58,_083097,_0694858,RM100000002LUR9,

6.PROBLEM SYMPTOMS TABLE

Refer to Problem Symptoms Table.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM (for SFTM Made)>PROBLEM SYMPTOMS TABLE202405,999999,_58,_083103,_0694953,RM100000002LUZB,

Result:

Result	Proceed to
Fault is not listed in Problem Symptoms Table	A
Fault is listed in Problem Symptoms Table	B

7.OVERALL ANALYSIS AND TROUBLESHOOTING*

8.REPAIR OR REPLACE

7.OVERALL ANALYSIS AND TROUBLESHOOTING*

Data List / Active Test

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM (for SFTM Made)>DATA LIST / ACTIVE TEST202405,202409,_58,_083103,_0694953,RM100000002LUZD,202409,999999,_58,_083103,_0694953,RM100000002ORUC,

Terminals of ECU

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM (for SFTM Made)>TERMINALS OF ECU202405,202409,_58,_083103,_0694953,RM100000002LUZC,202409,999999,_58,_083103,_0694953,RM100000002NUT3,

Operation check

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM (for SFTM Made)>OPERATION CHECK202405,999999,_58,_083103,_0694953,RM100000002LUZA,

Inspection

Result:

Proceed to
NEXT

8.REPAIR OR REPLACE

Result:

Proceed to
NEXT

9.CONFIRMATION TEST

Result:

Proceed to
NEXT

END