RM36D0EC _58 Vehicle Interior _083103 SEAT BELT _0419072 OCCUPANT DETECTION SENSOR(for SFTM Made Manual Seat) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for SFTM Made Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B543257

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



PROCEDURE

Hide 71511S 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

HINT:

When installing a separate type front seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>PRECAUTION


a.
B553673C01
1.792,4.083 1.854,3.375 1.854,3.375 2.042,3.375 false 2.063,3.26 2.375,3.417 0.313,0.156 10 false *a 1.635,2.021 1.854,2.24 0.219,0.219 10 true (1) 0.958,1.927 1.177,2.146 0.219,0.219 10 true (2) 2.219,1.938 2.438,2.156 0.219,0.219 10 true (3) 1.635,0.729 1.854,0.948 0.219,0.219 10 true (4) 1.083,0.76 1.302,0.979 0.219,0.219 10 true (5) 0.458,0.792 0.677,1.01 0.219,0.219 10 true (6) 0.396,1.198 0.615,1.417 0.219,0.219 10 true (7) 0.385,1.781 0.604,2 0.219,0.219 10 true (8) 0.344,2.104 0.563,2.323 0.219,0.219 10 true (9) 2.094,0.74 2.385,0.958 0.292,0.219 10 true (10) 2.708,0.802 3,1.021 0.292,0.219 10 true (11) 2.781,1.219 3.073,1.438 0.292,0.219 10 true (12) 2.802,1.792 3.094,2.01 0.292,0.219 10 true (13) 2.833,2.115 3.125,2.333 0.292,0.219 10 true (14)
*a Hog Ring Pliers


Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad (occupant detection sensor) with 14 new hog rings in the order shown in the illustration.

NOTICE:
·

Be careful not to dirty or damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




b.

Attach the fastening tape.


Hide 2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 71876F 3.INSTALL RH SEAT RECLINING ADJUSTER INSIDE COVER RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 4.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 71861 5.INSTALL FRONT SEAT INNER CUSHION SHIELD RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 71811D 6.INSTALL FRONT SEAT CUSHION SHIELD RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 72525A 7.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>REASSEMBLY


Hide 8.INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>INSTALLATION


Hide 10. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART