After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
When disconnecting and reconnecting the auxiliary battery.
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main body ECU (multiplex network body ECU) |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main body ECU (multiplex network body ECU) |
Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
Reconnect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A-13 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| A-14 (GND2) - Body ground | Ground | Always | Below 1 Ω |
| A-26 (BECU) - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| A-27 (IGR) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V |
Install the main body ECU (multiplex network body ECU) to the power distribution box assembly.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 6F-43 - Body ground | Rear window defogger signal (output) | Rear window defogger switch off | Below 1 V |
| Rear window defogger switch on | 11 to 14 V | ||
| 6C-10 - Body ground | Power retract mirror motor drive voltage (output) | Outer rear view mirror assembly moves to the retracted position | Below 1 V |
| Outer rear view mirror assembly does not move | 11 to 14 V | ||
| 6C-21 - Body ground | Power retract mirror motor drive voltage (output) | Outer rear view mirror assembly moves to the retracted position | Below 1 V |
| Outer rear view mirror assembly does not move | 11 to 14 V | ||
| 6F-28 - Body ground | Front fog light output | Front fog light switch off | 11 to 14 V |
| Front fog light switch on | Below 1 V | ||
| 6F-7 - Body ground | Rear fog light output | Rear fog light switch off | Below 1 V |
| Rear fog light switch on | 11 to 14 V | ||
| 6F-38 - Body ground | Back-up light output | Shift position is not P | Below 1 V |
| Shift position is P | 11 to 14 V | ||
| 6C-2 - Body ground | Back-up light output | Shift position is not P | Below 1 V |
| Shift position is P | 11 to 14 V | ||
| 6C-1 - Body ground | Panel light output | Panel light not illuminated | Below 1 V |
| Panel light illuminated | 11 to 14 V | ||
| 6F-9 - Body ground | Panel light output | Panel light not illuminated | Below 1 V |
| Panel light illuminated | 11 to 14 V | ||
| 6F-30 - Body ground | Tailight output | Tailight not illuminated | Below 1 V |
| Tailight illuminated | 11 to 14 V | ||
| 6B-2 - Body ground | Mirror heater drive voltage (output) | Window defogger switch (mirror heater switch) off | Below 1 V |
| Window defogger switch (mirror heater switch) on | 11 to 14 V | ||
| 6E-18 - Body ground | Tailight output | Tailight not illuminated | Below 1 V |
| Tailight output | 11 to 14 V |