Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
85720C
1.INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
Using a T25 "TORX" socket wrench, install the power window regulator motor assembly LH to the front door window regulator sub-assembly LH with the 3 "TORX" screws.
A new front window regulator uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.
69802
2.INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH
68102
3.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH
67832
4.INSTALL FRONT DOOR SERVICE HOLE COVER LH
68193C
5.INSTALL FRONT DOOR FRONT BELT SEAL LH
68172A
6.INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH
67602
7.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
8.INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
9.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
74640C
10.INSTALL DOOR ASSIST GRIP ASSEMBLY LH
69278B
11.INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH
12.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
13. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
14. INITIALIZE POWER WINDOW CONTROL SYSTEM
15. CHECK POWER WINDOW CONTROL SYSTEM