RM3660EC _56 Audio / Visual / Telematics _080752 NAVIGATION / MULTI INFO DISPLAY _0599611 NAVIGATION SYSTEM(for 10.25 Inch Display) D

NAVIGATION / MULTI INFO DISPLAY NAVIGATION SYSTEM(for 10.25 Inch Display) VEHICLE CONTROL HISTORY (RoB)

NOTICE:: When checking the vehicle control history (RoB), record any stored history first.

Check Vehicle Control History (RoB) (Navigation System)

In accordance with the display of the GTS, check the vehicle control history (RoB).

Body Electrical > Navigation System > Utility

Tester Display
Vehicle Control History (RoB)

50005 496 55

Vehicle Control History (RoB) Items (Navigation System)
Code	Item	Description	Note
X20B0	Circumference Monitoring Camera Control Module Malfunction (w/ Panoramic View Monitor System)	Radio and display receiver assembly is storing history from when a panoramic view monitor system malfunction was received	Perform troubleshooting for the panoramic view monitor system. (202307,999999,_56,_080754,_0612151,RM100000002CL9G,) HINT: Stored when a panoramic view monitor system malfunction is received by the radio and display receiver assembly via CAN communication.
X20B1	Rear Camera Malfunction (w/ Parking Assist Monitor System)	Radio and display receiver assembly is storing history from when a back guide monitor malfunction was received	Perform troubleshooting for the back guide monitor system. (202304,999999,_56,_080754,_0596561,RM100000002AX0B,) HINT: Stored when a back guide monitor malfunction notification is received by the radio and display receiver assembly via CAN communication.
X3FF0	Over The Air Activation Start	Navigation receiver assembly is storing history from when CAN microcomputer OTA started	-
X3FF1	Over The Air Activation Stop	Navigation receiver assembly is storing history from when CAN microcomputer OTA ended	-
X8020	Video/Sound Signal Malfunction	Navigation receiver assembly is storing history from when an auxiliary battery low voltage (6.75 V or less) was detected	· Momentarily idle the vehicle or charge the auxiliary battery. · When the auxiliary battery voltage returns to normal, drive the vehicle. · Check that the auxiliary battery voltage is within the standard voltage range. (202304,999999,_56,_080752,_0599611,RM100000002B8VP,) HINT: When the auxiliary battery voltage becomes low (5.0 to 6.8 V), images are blacked out and audio is muted.
X8021	Touch Switch Stuck	Navigation receiver assembly is storing history from when a stuck touch switch was detected	1. Check for foreign objects (foreign matter, film, etc.). 2. Replace the navigation receiver assembly.
X8022	Initialization History	Navigation receiver assembly is storing history from when an intended initialization operation was detected	HINT: Explain to the customer that the navigation receiver assembly stores a history of an intended initialization operation using the multi-display.
X8024	Position Corrected History	Navigation receiver assembly is storing history from when the location calibration was 50 m or more	Refer to problem symptoms table (Vehicle position mark deviates from correct position and does not return to correct position) Click here(202307,999999,_56,_080752,_0599611,RM100000002CWHR,)
X8030	Soft Update (USB Reading Error)	Navigation receiver assembly is storing history from when a USB memory error was detected	HINT: Explain to the customer that any of the following could be the cause: · There is no update program · Memory cannot be read
X8031	Soft Update (Encryption Release Error)	Navigation receiver assembly is storing history from when a program update error was detected	HINT: Explain to the customer that any of the following could be the cause: · Update program corruption (decryption error) · Update program corruption (necessary files missing)
X8032	Soft Update (Program of Different Model)	History of detection of update program error stored by the navigation receiver assembly	HINT: Explain to the customer that the update program was judged to be for a different device.
X8033	USB Memory Malfunction (The File System Error)	Navigation receiver assembly is storing history from when a non-compatible file or malfunctioning USB storage device was connected to the No. 1 stereo jack adapter assembly	Connect a USB storage device with valid files. HINT: Explain to the customer that any of the following could be the cause: · There was a non-compatible system file · USB storage device has invalid FAT system
X8034	USB Memory Malfunction (With No Playable File)	Navigation receiver assembly is storing history from when no playable files on a USB storage device connected to the No. 1 stereo jack adapter assembly was detected	Connect a USB storage device that has playable files. HINT: Explain to the customer that there were no playable files on the USB storage device.
X8038	iPod Malfunction	Navigation receiver assembly is storing history from when a malfunctioning iPod was connected to the No. 1 stereo jack adapter assembly	1. Turn the ignition switch from off to ACC. 2. Check that the cable connecting the iPod is not malfunctioning. 3. Check the software version of the iPod iOS and check that it is a compatible device. HINT: · Explain to the customer that the iPod itself may be malfunctioning. · When the ignition switch is ACC and the iPod is connected to the No. 1 stereo jack adapter assembly, a record of the malfunction is stored. · If another iPod is to be connected, it is necessary to turn the ignition switch off in order for the device to be detected.
X8039	iPod Malfunction (With Control Software)	Navigation receiver assembly is storing history from when there was a malfunction of the control software of an iPod connected to the No. 1 stereo jack adapter assembly
X803A	iPod Malfunction (With Communication Error)	Navigation receiver assembly is storing history from when a communication error with an iPod connected to the No. 1 stereo jack adapter assembly was detected
X803B	iPod Malfunction (With No Playable File)	Navigation receiver assembly is storing history from when no playable files on an iPod connected to the No. 1 stereo jack adapter assembly was detected	Connect an iPod that has playable files. HINT: · When the ignition switch is ACC and the iPod is connected to the No. 1 stereo jack adapter assembly, a record of the malfunction is stored. · If another iPod is to be connected, it is necessary to turn the ignition switch off in order for the device to be detected.
X803C	SD Card Communication Malfunction	Navigation receiver assembly is storing history from when an SD card malfunction was detected	If the malfunction continues to recur, replace the navigation receiver assembly. Click here(202304,202502,_56,_080752,_0391866,RM100000002B050,202502,999999,_56,_080752,_0391866,RM100000002R2M8,) HINT: Explain to the customer that an internal SD malfunction has been detected by the navigation receiver assembly.
X803E	USB Over Current (Type C)	Stores a history that an overcurrent was detected and the power supply to the USB was stopped	· Check with another cable. · Check with another device. · Check USB communication signal line wire harness and connector [between radio and display receiver assembly and stereo jack adapter assembly]. HINT: Explain to the customer that the power supply to the USB may have stopped due to the following causes. · Defective connected cable · Defective connected device · Vehicle side connection terminal that is dirty or has water damage · Cable ends are dirty, have water damage or are making contact with other power sources

Clear Vehicle Control History (RoB) (Navigation System)

NOTICE:: By performing this procedure, all stored vehicle control history (RoB) will be cleared.

Using the GTS, select the vehicle control history (Rob).

Body Electrical > Navigation System > Utility

Tester Display
Vehicle Control History (RoB)

50005 496 55

Select the clear button and the clear vehicle control history (RoB) in accordance with the screen.