RM3660EC _59 Vehicle Exterior _080767 WIPER / WASHER _0391512 WIPER AND WASHER SYSTEM(for Gasoline Model) J

WIPER / WASHER  WIPER AND WASHER SYSTEM(for Gasoline Model)  Washer Motor Circuit  


DESCRIPTION

When the windshield washer motor and pump assembly receives signals from the windshield wiper relay assembly, it operates to spray washer fluid from the washer nozzle sub-assemblies.

WIRING DIAGRAM

for NR Series
E394733E04
1.083,0.271 1.698,0.469 0.615,0.198 10 false IGWS 1.083,0.75 1.698,0.948 0.615,0.198 10 false MPX1 1.115,1.188 1.573,1.385 0.458,0.198 10 false +WR 1.167,1.677 1.625,1.875 0.458,0.198 10 false -WR 1.115,2.156 1.573,2.354 0.458,0.198 10 false EWS 1.573,2.156 1.885,2.354 0.313,0.198 10 false A55 1.583,0.281 1.896,0.479 0.313,0.198 10 false A55 1.583,1.188 1.896,1.385 0.313,0.198 10 false A55 1.573,1.677 1.885,1.875 0.313,0.198 10 false A55 1.583,0.75 1.896,0.948 0.313,0.198 10 false A56 1.656,0.073 1.813,0.271 0.156,0.198 10 false 6 1.656,0.552 1.813,0.75 0.156,0.198 10 false 4 1.646,0.99 1.802,1.188 0.156,0.198 10 false 1 1.667,1.458 1.823,1.656 0.156,0.198 10 false 7 1.656,1.948 1.813,2.146 0.156,0.198 10 false 5 0.219,2.552 3.583,2.75 3.365,0.198 10 false Windshield Wiper Relay Assembly 2.198,1.563 2.354,1.76 0.156,0.198 10 false 2 2.406,1.563 2.719,1.76 0.313,0.198 10 false SW 3.51,1.573 3.667,1.771 0.156,0.198 10 false B 3.729,1.573 3.885,1.771 0.156,0.198 10 false 1 2.25,1.938 2.563,2.135 0.313,0.198 10 false A35 2.26,2.094 3.885,2.854 1.625,0.76 10 false Windshield Washer Motor and Pump Assembly 5.26,1.104 5.573,1.302 0.313,0.198 10 false I84 5.26,1.26 6.927,2.031 1.667,0.771 10 false Main Body ECU (Multiplex Network Body ECU) 5.375,0.76 5.99,0.958 0.615,0.198 10 false CXP1 5.177,0.594 5.333,0.802 0.156,0.208 10 false 5 3.719,0.271 6.781,0.469 3.063,0.198 10 false from IG1-NO. 2 Relay 2.74,0.417 3.656,0.615 0.917,0.198 10 false WASHER 0.927,3.281 4.75,3.479 3.823,0.198 10 false : CXPI Communication Line

except NR Series
E503676
0.688,0.292 1.302,0.49 0.615,0.198 10 false IGWS 0.719,1.135 1.333,1.333 0.615,0.198 10 false MPX1 0.75,1.594 1.208,1.792 0.458,0.198 10 false +WR 0.74,2.563 1.198,2.76 0.458,0.198 10 false EWS 1.177,2.563 1.49,2.76 0.313,0.198 10 false A55 1.177,1.146 1.49,1.344 0.313,0.198 10 false A56 1.271,0.052 1.427,0.25 0.156,0.198 10 false 6 1.25,0.948 1.406,1.146 0.156,0.198 10 false 4 1.271,1.375 1.427,1.573 0.156,0.198 10 false 1 1.271,2.365 1.427,2.563 0.156,0.198 10 false 5 0.115,2.927 2.417,3.521 2.302,0.594 10 false Windshield Wiper Relay Assembly 1.813,1.99 1.969,2.188 0.156,0.198 10 false 2 3.323,1.969 3.479,2.167 0.156,0.198 10 false 1 1.979,2.385 2.292,2.583 0.313,0.198 10 false A35 1.969,2.521 4.969,2.906 3,0.385 10 false Windshield Washer Motor and Pump Assembly 3.635,1.146 3.948,1.344 0.313,0.198 10 false 10A 5.479,1.75 7.115,2.615 1.635,0.865 10 false Main Body ECU (Multiplex Network Body ECU) 5.521,1.156 6.135,1.354 0.615,0.198 10 false CXP1 3.708,0.948 3.865,1.156 0.156,0.208 10 false 9 1.792,0.365 2.708,0.563 0.917,0.198 10 false WASHER 0.927,3.292 4.75,3.49 3.823,0.198 10 false : CXPI Communication Line 1.177,1.594 1.49,1.792 0.313,0.198 10 false A55 1.188,0.25 1.5,0.448 0.313,0.198 10 false A55 5.167,1.156 5.479,1.354 0.313,0.198 10 false MB 5.177,0.958 5.49,1.156 0.313,0.198 10 false 22 3.99,1.521 5.427,2.354 1.438,0.833 10 false Power Distribution Box Assembly 3.125,1.979 3.354,2.25 0.229,0.271 10 false B 1.99,1.948 2.333,2.24 0.344,0.292 10 false SW 2.844,0.24 4.344,0.563 1.5,0.323 10 false from IGP-MAIN Relay

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses of circuits related to this system before performing the following procedure.


PROCEDURE

1.PERFORM ACTIVE TEST USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter following menus: Body Electrical / Main Body / Active Test.


e.

Perform the Active Test according to the display on the GTS.

for NR Series:

Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Front Washer Relay Function to operate the windshield washer motor and pump assembly (Front) OFF or ON -
Body Electrical > Main Body > Active Test
Tester Display
Front Washer Relay
50004 123 77

except NR Series:

Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Front Washer Relay Function to operate the windshield washer motor and pump assembly (Front) OFF or ON -
Body Electrical > Main Body > Active Test
Tester Display
Front Washer Relay
50004 449 71
OK:

Windshield washer motor and pump assembly operates normally.



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM (for Gasoline Model)>PROBLEM SYMPTOMS TABLE


NG

2.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
2.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
a.

Remove the windshield washer motor and pump assembly.

Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>REMOVAL


b.

Inspect the windshield washer motor and pump assembly.

Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (POWER SOURCE - WINDSHIELD WIPER RELAY ASSEMBLY)

NG

REPLACE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>REMOVAL


3.CHECK HARNESS AND CONNECTOR (POWER SOURCE - WINDSHIELD WIPER RELAY ASSEMBLY)
a.

Disconnect the A55 windshield wiper relay assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
A55-6 (IGWS) - Body ground Ignition switch ON 11 to 14 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (WINDSHIELD WIPER RELAY ASSEMBLY - BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (WINDSHIELD WIPER RELAY ASSEMBLY - BODY GROUND)
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A55-5 (EWS) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (WINDSHIELD WIPER RELAY ASSEMBLY - WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (WINDSHIELD WIPER RELAY ASSEMBLY - WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY)
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for NR Series:
Tester Connection Condition Specified Condition
A55-1 (+WR) - A35-1 (B) Always Below 1 Ω
A55-7 (-WR) - A35-2 (SW) Always Below 1 Ω
A55-1 (+WR) or A35-1 (B) - Body ground Always 10 kΩ or higher
A55-7 (-WR) or A35-2 (SW) - Body ground Always 10 kΩ or higher

except NR Series:
Tester Connection Condition Specified Condition
A55-1 (+WR) - A35-1 (B) Always Below 1 Ω
A55-1 (+WR) or A35-1 (B) - Body ground Always 10 kΩ or higher
A35-2 (SW) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE WINDSHIELD WIPER RELAY ASSEMBLY

Click hereVehicle Exterior>WIPER / WASHER>WIPER ECU>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR