INSPECT ILLUMINATED ENTRY SYSTEM OPERATION
Perform this inspection with the customize parameters at the initial settings.
Perform this inspection with the map light assembly door linked switch on, room light switch LH and room light switch RH of the room light assembly on*4, and the rear room light (No. 1 room light assembly) switch set to DOOR*3.
| Control | Condition | Lights that Operate |
|---|---|---|
| Actuation Area-linked*5 | With the engine switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*6 ·
Cup Holder Light (Console Box Pocket Garnish)*7 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*8 |
| Door Lock/Unlock-linked | With the ignition switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*6 ·
Cup Holder Light (Console Box Pocket Garnish)*7 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*8 |
| Door Open/Close-linked | With the ignition switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*6 ·
Cup Holder Light (Console Box Pocket Garnish)*7 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*8 |
| With the engine switch off and all of the doors closed, open any front door and check that the light that operates turns on. While the light that operates is on, close the front doors and check that the light that operates turns off after approximately 40 seconds. | Engine Switch Illumination*5 | |
| With the ignition switch in ON, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 |
|
| Engine Switch-linked*1 | Turn the engine switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*6 ·
Cup Holder Light (Console Box Pocket Garnish)*7 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*8 |
| Turn the engine switch from on (ACC) or on (IG) to off and check that the light that operates turns on for approximately 40 seconds and then turns off. | Engine Switch Illumination*1 | |
| Ignition Switch-linked*2 | Turn the ignition switch from ACC or ON to off and check that the lights that operate turn on for approximately 15 seconds and then turn off. | ·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*3 ·
Room Light Assembly*4 |
| Shift Position-linked | With the ignition switch on (ACC) or on (IG), move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness. | ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*6 ·
Cup Holder Light (Console Box Pocket Garnish)*7 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*8 |
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
*3: w/ Room Light (for Slide Switch Type)
*4: w/ Room Light (for Push Switch Type)
*5: w/ Entry Function
*6: w/ Center Tray Light
*7: w/ Cup Holder Light
*8: w/ Footwell Light
INSPECT BATTERY SAVING CONTROL OPERATION
The operations and conditions of this control are described below.
| Control | Condition | Lights that Operate |
|---|---|---|
| Battery Saving | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Map Light Assembly ·
Rear Room Light (No. 1 Room Light Assembly)*2 ·
Room Light Assembly*3 ·
No. 1 Luggage Compartment Light Assembly ·
Center Tray Illumination Light (Instrument Panel Light Assembly)*4 ·
Cup Holder Light (Console Box Pocket Garnish)*5 ·
Footwell Light (No. 1 Interior Illumination Light Assembly)*6 |
When 20 minutes elapse after the driver door/front passenger door is opened and the lights that operate remain on, the lights are turned off.
|
Engine Switch Illumination*1 |
*1: w/ Entry Function
*2: w/ Room Light (for Slide Switch Type)
*3: w/ Room Light (for Push Switch Type)
*4: w/ Center Tray Light
*5: w/ Cup Holder Light
*6: w/ Footwell Light