LIGHTING (INT)  LIGHTING SYSTEM(for NR Series Engine)  CUSTOMIZE PARAMETERS  

Connect the GTS to the DLC3.

Turn the ignition switch to ON.

Turn the GTS on.

Enter the following menus: Customize Setting / Illuminated Entry.

Select the setting by referring to the table below.

Illuminated Entry

Tester Display	Description	Default	Setting	ECU
Lighting Time	Changes the lighting time of the following lights that are operated by the timer function when the map light assembly door linked switch is on, room light switch LH and room light switch RH of the room light assembly are on*3, and the rear room light (No. 1 room light assembly) switch is set to DOOR*2: · Map light assembly · Rear room light (No. 1 room light assembly)*2 · Room light assembly*3 · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	15 s	10:30 s,00:15 s,01:7.5 s	Main body ECU (Multiplex network body ECU)
I/L when ACC OFF	Lights up the following lights automatically when the map light assembly door linked switch is on, room light switch LH and room light switch RH of the room light assembly are on*3, the rear room light (No. 1 room light assembly) switch is set to DOOR*2, and the ignition switch is turned from ON or ACC to off: · Map light assembly · Rear room light (No. 1 room light assembly)*2 · Room light assembly*3 · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
I/L ON W/Door Key Unlock	Lights up the following lights automatically when the map light assembly door linked switch is on, room light switch LH and room light switch RH of the room light assembly are on*3, the rear room light (No. 1 room light assembly) switch is set to DOOR*2, and the doors are unlocked by an unlock operation: · Map light assembly · Rear room light (No. 1 room light assembly)*2 · Room light assembly*3 · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
Room Light when Aprchd	Lights up the following lights when the map light assembly door linked switch is on, room light switch LH and room light switch RH of the room light assembly are on*3, the rear room light (No. 1 room light assembly) switch is set to DOOR*2, and the electrical key transmitter sub-assembly is brought near the vehicle*1: · Map light assembly · Rear room light (No. 1 room light assembly)*2 · Room light assembly*3 · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
Inside Foot Light	Turns on the following lights: · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
Light Control	Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P: · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)
Interior Light Control	Lights up the following lights: · Map light assembly · Rear room light (No. 1 room light assembly)*2 · Room light assembly*3 · Center tray illumination light (instrument panel light assembly)*4 · Cup holder light (console box pocket garnish)*5 · Footwell light (No. 1 interior illumination light assembly)*6	ON	0:OFF,1:ON	Main body ECU (Multiplex network body ECU)

50006 6