RM3660EC _54 Brake _080770 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0599814 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model (NR Series)) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model (NR Series)) C059746 Brake System Control Module "A" Calibration / Parameter Memory Failure

DESCRIPTION

If the system information stored by the skid control ECU (brake actuator assembly) is corrupted, this DTC is output.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C059746	Brake System Control Module "A" Calibration / Parameter Memory Failure	The skid control ECU (brake actuator assembly) is corrupted or cannot be read.	Skid control ECU (brake actuator assembly)

DTC Detection Conditions: C059746
		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	-	-	-
Malfunction Status	The skid control ECU (brake actuator assembly) is corrupted.	○	-
Malfunction Status	The skid control ECU (brake actuator assembly) is cannot be read.	-	○
Detection Time		-	-
Number of Trips		1 trip	1 trip

HINT:: DTC will be output when conditions for either of the patterns in the table above are met.

NOTICE:: After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.; Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model (NR Series))>UTILITY202304,999999,_54,_080770,_0599814,RM100000002BA8F,

1.REPLACE BRAKE ACTUATOR ASSEMBLY

Replace the skid control ECU (brake actuator assembly).

Result:

Proceed to
NEXT

END