RM3660EC _54 Brake _080770 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0599814 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model (NR Series)) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model (NR Series))  C05202A  Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range  


DESCRIPTION

The airbag sensor with ECU assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.

The skid control ECU (brake actuator assembly) memorizes the range of the acceleration sensor (airbag sensor with ECU assembly) and the range of vehicle speed calculated using each speed sensor.

If the range of the acceleration sensor (airbag sensor with ECU assembly) and the range of vehicle speed calculated using each speed sensor are judged to be abnormal when compared to their past memorized range, this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C05202A Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range The memorized range (longitudinal) of the acceleration sensor (airbag sensor with ECU assembly) is judged to be abnormal when compared to its past memorized range. Acceleration sensor (airbag sensor with ECU assembly)

CAUTION / NOTICE / HINT

NOTICE:

After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor with ECU assembly), perform acceleration sensor zero point calibration and store system information memorization after performing "Reset Memory".

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model (NR Series))>UTILITY


PROCEDURE

1.REPLACE AIRBAG SENSOR WITH ECU ASSEMBLY
a.

Replace the yaw rate and acceleration sensor (airbag sensor with ECU assembly).

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>REMOVAL


Result:
Proceed to
NEXT



NEXT

END