RM3660EC _57 Power Source / Network _080742 POWER DISTRIBUTION _0596896 POWER INTEGRATION SYSTEM C

POWER DISTRIBUTION POWER INTEGRATION SYSTEM B235504 Power Distribution Box System Internal Failure

DESCRIPTION

This DTC is output when the power distribution box assembly detects an internal circuit error.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B235504	Power Distribution Box System Internal Failure	· Microcomputer abnormality · AD circuit trouble · The load drive output open or short trouble	Power distribution box assembly

NOTICE:: ·

When using the GTS with the ignition switch off to troubleshoot:

Connect the GTS to the vehicle, and turn a courtesy switch on and off at 1.5 second intervals until communication between the GTS and vehicle begins.

·

Inspect the fuses for circuits related to this system before performing the following procedure.

1.CONFIRM PROBLEM SYMPTOMS

Check that no dependent system of the power distribution box assembly is malfunctioning.

HINT:: Refer to the link for dependent systems of the power distribution box assembly.; Click herePower Source / Network>POWER DISTRIBUTION>POWER INTEGRATION SYSTEM>SYSTEM DESCRIPTION202304,999999,_57,_080742,_0596896,RM100000002AXWJ,

Result:

Result	Proceed to
No dependent system of the power distribution box assembly is malfunctioning	A
A dependent system of the power distribution box assembly is malfunctioning	B

3.CLEAR DTC

2.INSPECT RELATED SYSTEMS

Perform an inspection for each malfunctioning system by following "HOW TO PROCEED WITH TROUBLESHOOTING".

Result:

Result	Proceed to
No related system is malfunctioning	A
A related system is malfunctioning	B

3.CLEAR DTC

REPAIR OR REPLACE MALFUNCTIONING COMPONENT

3.CLEAR DTC

Clear the DTCs.

Result:

Proceed to
NEXT

4.CHECK FOR DTC

Check for DTCs.

Result:

Result	Proceed to
B235504 is not output	A
B235504 is output	B

USE SIMULATION METHOD TO CHECK

REPLACE POWER DISTRIBUTION BOX ASSEMBLY