REAR TELEVISION CAMERA ASSEMBLY
Disconnect the rear television camera assembly connector.
Measure the voltage on the wire harness side connector according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| O185-4 (CB+) - O185-3 (CGND) | Power source | Ignition switch ACC | 6 to 9 V |
Reconnect the rear television camera assembly connector.
Measure the resistance on the wire harness side connector according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| O185-1 (CANH) | CAN communication line | - | - |
| O185-2 (CANL) | CAN communication line | - | - |
| O185-3 (CGND) - Body ground | Camera ground | Always | Below 1 Ω |
| O185-5 (CV-) | Video signal | - | - |
| O185-6 (CV+) | Video signal | - | - |
| O185-7 (SGND) - Body ground | Camera ground (shield) | Always | Below 1 Ω |
RADIO AND DISPLAY RECEIVER ASSEMBLY