☰ Toyota Levin Turbo☰ فهرستAudio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(w/o RST Switch (except 10.25 Inch Display))
RM3660EC
_56
Audio / Visual / Telematics
_080752
NAVIGATION / MULTI INFO DISPLAY
_0528911
NAVIGATION SYSTEM(w/o RST Switch (except 10.25 Inch Display))
J
NAVIGATION / MULTI INFO DISPLAY NAVIGATION SYSTEM(w/o RST Switch (except 10.25 Inch Display)) Sound cannot be Heard Sound Quality is Poor only when Replaying USB Storage Device or "iPod"
WIRING DIAGRAM
1.344,0.5 1.521,0.677
0.177,0.177
10
false
2
0.865,1.427 1.313,1.625
0.448,0.198
10
false
UDO+
0.906,2.177 1.313,2.365
0.406,0.188
10
false
UJSS
5.906,2.188 6.313,2.365
0.406,0.177
10
false
USG1
5.906,1.438 6.344,1.615
0.438,0.177
10
false
US1+
5.906,0.646 6.281,0.854
0.375,0.208
10
false
US1-
0.458,2.646 0.781,2.833
0.323,0.188
10
false
I190
0.448,2.781 2.75,3
2.302,0.219
10
false
No. 1 Stereo Jack Adapter Assembly
2.458,3.25 4.135,3.438
1.677,0.188
10
false
: USB Communication Line
3.552,1.729 3.719,1.896
0.167,0.167
10
false
*
5.833,2.625 6.135,2.813
0.302,0.188
10
false
I191
5.833,2.781 7.052,3.167
1.219,0.385
10
false
Navigation Receiver Assembly
5.729,0.542 5.906,0.719
0.177,0.177
10
false
2
1.333,1.323 1.51,1.5
0.177,0.177
10
false
3
1.354,2.094 1.531,2.271
0.177,0.177
10
false
5
5.75,2.115 5.927,2.292
0.177,0.177
10
false
5
5.74,1.323 5.917,1.5
0.177,0.177
10
false
3
0.906,0.635 1.302,0.854
0.396,0.219
10
false
UDO-
0.281,3.281 1.125,3.51
0.844,0.229
10
false
*: Shielded
CAUTION / NOTICE / HINT
- NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.
PROCEDURE
1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.
Disconnect the I191 navigation receiver assembly connector.
b.
Disconnect the I190 No. 1 stereo jack adapter assembly connector.
c.
1.458,0.167 1.958,0.417
0.5,0.25
1.458,1.833 1.958,2.083
0.5,0.25
1.333,1.25 1.604,0.938
true
2.083,1.25 1.792,0.938
true
1.917,1.5 1.708,1.094
true
1.333,2.917 1.625,2.604
true
2.083,2.917 1.813,2.604
true
1.917,3.167 1.719,2.76
true
0.667,0.167 0.917,0.333
0.25,0.167
10
false
*a
0.667,1.833 0.917,2
0.25,0.167
10
false
*b
1.583,0.188 1.896,0.344
0.313,0.156
10
false
I191
1.583,1.844 1.896,2
0.313,0.156
10
false
I190
0.948,1.146 1.333,1.323
0.385,0.177
10
false
US1+
2.104,1.156 2.479,1.333
0.375,0.177
10
false
US1-
1.74,1.479 2.219,1.646
0.479,0.167
10
false
USG1
0.927,2.813 1.333,2.979
0.406,0.167
10
false
UDO+
2.104,2.823 2.5,3
0.396,0.177
10
false
UDO-
1.781,3.156 2.177,3.323
0.396,0.167
10
false
UJSS
| *a | Front view of wire harness connector
(to Navigation Receiver Assembly) |
| *b | Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition I191-2 (US1-) - I190-2 (UDO-) Always Below 1 Ω I191-3 (US1+) - I190-3 (UDO+) Always Below 1 Ω I191-5 (USG1) - I190-5 (UJSS) Always Below 1 Ω I191-2 (US1-) or I190-2 (UDO-) - Body ground Always 10 kΩ or higher I191-3 (US1+) or I190-3 (UDO+) - Body ground Always 10 kΩ or higher I191-5 (USG1) or I190-5 (UJSS) - Body ground Always 10 kΩ or higher
- Result:
Proceed to OK NG
OK
2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
2.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
a.
Replace the No. 1 stereo jack adapter assembly with a new or known good one.
b.
Check if the problem symptom recurs.
- Result:
Result Proceed to Malfunction disappears A Malfunction occurs B
A
END (NO. 1 STEREO JACK ADAPTER ASSEMBLY MALFUNCTIO)
B