1. REGISTER VEHICLE INFORMATION
If the telematics transceiver has been replaced, it is necessary to perform the Register Vehicle Information procedure.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / Utility / VIN Synchronization
| Tester Display |
|---|
| VIN Synchronization |
According to the display on the GTS, read the IMEI, ICCID, IMSI, software version and VIN.
Turn the engine switch off.
Turn the engine switch on (IG) and wait for approximately 1 minutes.