Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C2176 | Receiver Error | Malfunction in the tire pressure warning ECU and receiver internal circuit | Tire pressure warning ECU and receiver | - |
When replacing the tire pressure warning ECU and receiver, read the transmitter IDs and number of the transmitters (4 or 5) stored in the old ECU using the GTS and write them down before removal.
It is necessary to perform initializationSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type A))>INITIALIZATION201906,202304,_53,_080780,_0393955,RM100000001I1BC,202304,999999,_53,_080780,_0393955,RM100000002BB37, after registrationSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type A))>REGISTRATION201906,202304,_53,_080780,_0393955,RM100000001I1B2,202304,999999,_53,_080780,_0393955,RM100000002B0BZ, of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
Clear the DTCs.
Turn the ignition switch off.
Turn the ignition switch to ON and check for DTCs.
| Result | Proceed to |
|---|---|
| C2176 is not output | A |
| C2176 is output | B |
A
B