RM3660EC
_51
Engine / Hybrid System
_080777
NR Series ENGINE CONTROL
_0392345
KNOCK SENSOR
A
NR Series ENGINE CONTROL KNOCK SENSOR INSTALLATION
PROCEDURE
89615
1.INSTALL KNOCK CONTROL SENSOR
- HINT:
-
Perform "Inspection After Repair" after replacing the knock control sensor.
a.
0.938,3.969 1.521,3.969
true
1.646,2.198 1.833,2.365
0.188,0.167
10
true
*a
0.823,2.979 1.031,3.167
0.208,0.188
10
true
*b
0.74,3.865 0.927,4.042
0.188,0.177
10
true
*c
1.5,4.51 1.813,4.667
0.313,0.156
10
false
*d
1.896,4.094 2.063,4.281
0.167,0.188
10
true
*e
1.01,4.094 1.177,4.281
0.167,0.188
10
true
*e
| *a | Top |
| *b | Front of Engine |
| *c | Mark |
| *d | 12.5° |
| *e | 5° |
Install the knock control sensor to the cylinder block sub-assembly with the bolt so that the knock control sensor installation position is as shown in the illustration.
- Torque:
- 20 N*m (204 kgf*cm, 15 ft.*lbf)
- NOTICE:
- ·
If the knock control sensor has been struck or dropped, replace it.
·Make sure that the knock control sensor is in the correct position.
b.
Connect the knock control sensor connector.
c.
Install the No. 4 engine wire with the bolt.
- Torque:
- 10 N*m (102 kgf*cm, 7 ft.*lbf)
27020
2.INSTALL GENERATOR ASSEMBLY
3.PERFORM INITIALIZATION
a.
Perform "Inspection After Repair" after replacing the knock control sensor.