☰ Toyota Levin Turbo☰ فهرستAudio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Gasoline Model with RST Switch)
RM3660EC
_56
Audio / Visual / Telematics
_080752
NAVIGATION / MULTI INFO DISPLAY
_0391865
NAVIGATION SYSTEM(for Gasoline Model with RST Switch)
J
NAVIGATION / MULTI INFO DISPLAY NAVIGATION SYSTEM(for Gasoline Model with RST Switch) Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the navigation receiver assembly via this circuit.
WIRING DIAGRAM
0.458,2.677 1.042,2.969
0.583,0.292
10
false
I154
0.458,2.844 1.646,3.302
1.188,0.458
10
false
No. 1 Stereo Jack Adapter Assembly
2.448,3.271 5.115,3.625
2.667,0.354
10
false
: Data Signal (USB Communication Line)
5.531,2.635 6.115,2.927
0.583,0.292
10
false
I171
5.531,2.802 6.771,3.313
1.24,0.51
10
false
Navigation Receiver Assembly
5.927,2.219 6.51,2.51
0.583,0.292
10
false
USG1
3.25,1.76 4.01,2.094
0.76,0.333
10
false
(Shielded)
1.333,0.531 1.917,0.823
0.583,0.292
10
false
9
1.323,1.302 1.906,1.594
0.583,0.292
10
false
10
1.333,2.104 1.917,2.396
0.583,0.292
10
false
12
5.917,0.667 6.5,0.958
0.583,0.292
10
false
US1-
5.917,1.448 6.5,1.74
0.583,0.292
10
false
US1+
5.719,0.521 6.302,0.813
0.583,0.292
10
false
2
5.719,1.313 6.302,1.604
0.583,0.292
10
false
3
5.729,2.094 6.313,2.385
0.583,0.292
10
false
5
0.896,2.229 1.479,2.521
0.583,0.292
10
false
UJSS
0.885,1.458 1.469,1.75
0.583,0.292
10
false
UDO+
0.906,0.646 1.49,0.938
0.583,0.292
10
false
UDO-
PROCEDURE
1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.
Disconnect the I171 navigation receiver assembly connector.
b.
Disconnect the I154 No. 1 stereo jack adapter assembly connector.
c.
1.5,2.333 1.917,2.563
0.417,0.229
1.5,0.25 1.917,0.479
0.417,0.229
1.792,1.438 2.333,1.729
false
1.083,1.667 1.625,1.438
false
1.792,1.583 2.083,2
false
1.104,4.031 1.646,3.802
false
1.771,3.792 2.198,4.115
false
1.667,3.885 1.406,4.167
false
0.167,0.135 0.479,0.333
0.313,0.198
10
false
*a
0.188,2.302 0.5,2.5
0.313,0.198
10
false
*b
1.573,0.281 1.948,0.479
0.375,0.198
10
false
I171
1.573,2.354 1.979,2.531
0.406,0.177
10
false
I154
2.417,1.719 2.917,1.917
0.5,0.198
10
false
US1-
0.667,1.635 1.167,1.833
0.5,0.198
10
false
US1+
2.083,2.052 2.583,2.25
0.5,0.198
10
false
USG1
0.708,3.969 1.208,4.167
0.5,0.198
10
false
UDO-
2.26,4.042 2.76,4.24
0.5,0.198
10
false
UDO+
1.24,4.177 1.74,4.375
0.5,0.198
10
false
UJSS
| *a | Front view of wire harness connector
(to Navigation Receiver Assembly) |
| *b | Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition I154-9 (UDO-) - I171-2 (US1-) Always Below 1 Ω I154-10 (UDO+) - I171-3 (US1+) Always Below 1 Ω I154-12 (UJSS) - I171-5 (USG1) Always Below 1 Ω I154-9 (UDO-) or I171-2 (US1-) - Body ground Always 10 kΩ or higher I154-10 (UDO+) or I171-3 (US1+) - Body ground Always 10 kΩ or higher I154-12 (UJSS) or I171-5 (USG1) - Body ground Always 10 kΩ or higher
- Result:
Proceed to OK NG
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR