PA10/PB10 HYBRID TRANSMISSION / TRANSAXLE  MOTOR CABLE  INSTALLATION  

Using an insulated tool, temporarily install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.

NOTICE:

·

To prevent the threads from being damaged, temporarily tighten the 6 bolts by hand.

·

Do not damage the terminals or hybrid vehicle transaxle assembly during installation.

·

Keep the motor cable terminals and their installation area free from foreign matter, water, etc.

·

Do not touch the waterproof seal or terminals of the motor cable.

·

Make sure the waterproof seal is not cut or pinched during installation.

Using an insulated tool, fully tighten the 6 bolts.

Torque:

10 N*m (102 kgf*cm, 7 ft.*lbf)

Temporarily install the terminal cap to the hybrid vehicle transaxle assembly with the 2 bolts.

NOTICE:

·

Keep the motor cable terminals and their installation area free from foreign matter, water, etc.

·

Do not touch the waterproof seal of the terminal cap or terminals of the motor cable.

·

Make sure the waterproof seal is not cut or pinched during installation.

Fully tighten the 2 bolts.

Torque:

10 N*m (102 kgf*cm, 7 ft.*lbf)