CHECK CUSTOMIZE PARAMETERS
The operation check below is based on the non-customized initial condition of the vehicle.
CHECK BASIC FUNCTION
The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.
All the functions listed below must be checked in comparison with the wireless door lock control operation area.
Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.
If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.
If the switch is held, the transmitter LED illuminates repeatedly.
Check that all doors lock when the lock switch is pressed.
Check that all doors unlock when the unlock switch is pressed.*1
Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 5 seconds.*2
Check that the luggage compartment door opens when the luggage compartment door open switch is held down for 0.8 seconds or more.
*1: Customize item "Wireless Unlock Twice Function" is set to "Disable" or "Remote 2-Press unlock" is set to "Off".
*2: Customize item "Wireless Unlock Twice Function" is set to "Enable" or "Remote 2-Press unlock" is set to "On".
CHECK CHATTERING PREVENTION FUNCTION
Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, check that the corresponding operation is carried out.
CHECK THE REPEAT FUNCTION
Check that all of the doors attempt to automatically lock 1 second after the lock switch has been pressed while the driver door control knob is being held in the unlock position.
CHECK SWITCH OPERATION FAIL-SAFE FUNCTION
Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.
CHECK ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION
When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.*1
When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*2
When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*3
When the back door is opened or closed by wireless operation, the hazard warning lights flash twice.
*1: Customize item "Wireless Lock Function with Doors Open" is set to "Enable" or "Wireless Lock When Door Opened" is set to "On".
*2: Customize item "Wireless Unlock Twice Function" is set to "Disable" or "Remote 2-Press unlock" is set to "Off".
*3: Customize item "Wireless Unlock Twice Function" is set to "Enable" or "Remote 2-Press unlock" is set to "On".
CHECK AUTOMATIC LOCKING FUNCTION
Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 30 seconds of all doors being unlocked by pressing the unlock switch.
Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.
Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 60 seconds of unlocking the doors by pressing the unlock switch.
CHECK DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR
With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.
The doors can be unlocked even when a door is open or ajar.
CHECK PANIC ALARM CONTROL FUNCTION
CHECK ILLUMINATED ENTRY FUNCTION
CHECK POWER WINDOW OPERATION FUNCTION
CHECK THE SLIDING ROOF OPERATION FUNCTION (w/ Sliding Roof System)