INSPECT ILLUMINATED ENTRY SYSTEM OPERATION
Perform this inspection with the customize settings set to their default setting.
Perform this inspection with the door linked switch of the map light assembly on and switch of the No. 1 room light assembly in the off (DOOR) position.
| Control | Outline | Lights that Operate |
|---|---|---|
|
*1: Models with smart entry and start system *2: Models with center tray illumination light *3: Models with cup holder light *4: Type A *5: Type B *6: Models with footwell light |
||
| Actuation Area-linked*1 | When a registered key is brought within any vehicle exterior detection area around the doors, the lights that operate turn on. | ·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 |
| Door Lock/Unlock-linked
(When entering the vehicle) |
In the above situation, the lights listed to the right illuminate when any door is unlocked. | ·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Footwell Light (LH/RH)*6 |
| Door Open/Close-linked
(When entering the vehicle) |
In the above situation, the lights listed to the right illuminate when any door is opened. | ·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
| Brake-linked | In the above situation, the lights listed to the right illuminate when the brake pedal is depressed. | Full illumination
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Footwell Light (LH/RH)*6 Blinking
·
Push Start Switch Illumination*1 |
| Ignition Switch-linked | In the above situation, the lights listed to the right illuminate when the ignition switch is turned from off or ACC to ON. | Full illumination
·
Push Start Switch Illumination*1 Dimmed
·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Footwell Light (LH/RH)*6 |
| Shift Position-linked | In the above situation, the lights listed to the right illuminate when the shift state is changed to other than P. | ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
| IG ON → OFF
(When exiting the vehicle) |
In the above situation, the lights listed to the right illuminate when the ignition switch is turned from ON to off or ACC. | ·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
| Door Lock/Unlock-linked
(When exiting the vehicle) |
In the above situation, the lights listed to the right dimly illuminate when any door is locked for approximately 7.5 seconds, or until the electrical key transmitter is carried outside of the detection area, and then turn off. | ·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 |
| Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
An actuation area-linked function is used.*1 ·
The door unlock-linked function is active. ·
Any door is opened and then all doors are closed when the ignition switch is off. ·
The ignition switch is turned from ACC or ON to off when all doors are closed. |
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
No. 1 Luggage Compartment Light Assembly |
| When approximately 40 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
Any front door is opened and then front doors are closed when the ignition switch is off. ·
The ignition switch is turned from on (ACC) or on (IG) to off when all doors are closed. |
Push Start Switch Illumination*1 | |
INSPECT BATTERY SAVING CONTROL OPERATION
The operations and conditions of this control are described below.
| Control | Condition | Lights that Operate |
|---|---|---|
|
*1: w/ Smart entry and start system *2: Type A *3: Type B |
||
| Battery Saving | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Map Light Assembly ·
Spot Light Assembly*2 ·
No. 1 Room Light Assembly*3 ·
No. 1 Luggage Compartment Light Assembly |
When 20 minutes elapse after the ignition switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.
|
Push Start Switch Illumination*1 | |