DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Lock Position Switch Status | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Rear door RH locked
UNLOCK: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Rear door LH locked
UNLOCK: Rear door LH unlocked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly RH signal | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly LH signal | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly RH signal | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly LH signal | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
| Luggage Courtesy Switch Status | Luggage compartment door courtesy switch signal | Close or Open | Close: Luggage compartment door closed
Open: Luggage compartment door open |
- |
| IGR Power | Ignition switch ON signal | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
- |
| Communication Illumination Module "A" | - | - | - | Cannot be used |
| Communication Illumination Module "B" | - | - | - | Cannot be used |
| Communication of Color Illumination Module "A" | - | - | - | Cannot be used |
| Communication of Color Illumination Module "B" | - | - | - | Cannot be used |
| Communication of Color Illumination Module "C" | - | - | - | Cannot be used |
| Interior Lights ON when Approached Function | Function that lights up the interior lights when the electrical key transmitter is brought near the vehicle | Disable or Enable | Enable | - |
| Interior Lights ON when Door Unlocked Function | Function that lights up the interior lights when the doors are unlocked by an unlock operation | Disable or Enable | Enable | - |
| Interior Lights ON when IG OFF Function | Function that lights up the interior lights when the ignition switch is turned from ON to off | Disable or Enable | Enable | - |
| Light Control Function | Function that dims the interior lights when the ignition switch is ON and the shift lever is moved to any position other than P | Disable or Enable | Enable | - |
| Interior Illumination Light 1 Function | Function that lights up the interior light 1 when the map light assembly is illuminated | Disable or Enable | Enable | - |
| Interior Illumination Light 2 Function | Function that lights up the interior light 2 when the map light assembly is illuminated | Disable or Enable | Enable | - |
| Interior Lights Lighting Timer Setting | Changes the lighting time of the interior lights that are operated by the timer function | Normal/Short/Long | Normal | for Driver 1* |
| Interior Lights ON Function | Function that lights up the interior lights | Disable or Enable | Enable | for Driver 1* |
*: "For Driver 1" is written as a representative example. "For Driver 2", "for Driver 3", and "for Guest" also have identical items.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Start Switch Light Function | Setting for the function to turn on the push start switch illumination.* | OFF or ON | Customized value is displayed | - |
*: w/ Smart entry and start system
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | OFF or ON | Perform the Active Test with the door linked switch of the map light assembly on and switch of the rear room light (No. 1 room light assembly) in the DOOR position. |
| Front Footwell Lights | Turns on the following lights:
·
Center tray illumination light*2 ·
Cup holder light*3 ·
Footwell light LH*4 ·
Footwell light RH*4 |
OFF or ON | Perform the Active Test with the vehicle stopped and ignition switch ON. |
| Extended Illumination 1 | - | - | Cannot be used |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | OFF or ON | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on) ·
ON: DOME CUT relay off (interior lights turn off) |
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
*2: w/ Center tray illumination light
*3: w/ Cup holder light
*4: w/ Footwell light
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Start SW Light Power Supply | Push start switch illumination* | OFF or ON | - |
*: w/ Smart entry and start system