RM3660EC _58 Vehicle Interior _080747 THEFT DETERRENT / KEYLESS ENTRY _0588948 THEFT DETERRENT SYSTEM(except NR Series Engine) U

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM(except NR Series Engine)  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY


B656499N02
2.385,3.219 2.823,3.469 0.438,0.25 4.708,3.208 5.146,3.458 0.438,0.25 1.76,4.573 2.198,4.823 0.438,0.25 5.385,4.573 5.823,4.823 0.438,0.25 1.208,6.156 1.646,6.406 0.438,0.25 3.083,6.125 3.521,6.375 0.438,0.25 6.281,6.135 6.719,6.385 0.438,0.25 3.531,7.865 3.969,8.115 0.438,0.25 5.281,6.135 5.719,6.385 0.438,0.25 4.271,6.135 4.708,6.385 0.438,0.25 1.667,1.365 1.969,1.365 false 4.042,0.802 4.042,0.323 4.042,0.323 4.229,0.323 false 1.656,1.698 1.958,1.698 false 0.615,1.167 0.927,1.167 false 0.625,1.604 0.938,1.604 false 0.625,1.865 0.938,1.865 false 0.625,2.094 0.938,2.094 false 0.635,2.344 0.948,2.344 false 5.938,1.229 6.25,1.229 false 5.938,1.844 6.25,1.844 false 3.667,7.917 3.979,8.115 0.313,0.198 10 false MB 4.281,0.229 4.594,0.427 0.313,0.198 10 false MB 2.021,1.281 2.333,1.479 0.313,0.198 10 false I86 2.021,1.615 2.333,1.813 0.313,0.198 10 false I85 0.323,1.083 0.635,1.281 0.313,0.198 10 false 10G 6.302,1.146 6.688,1.344 0.385,0.198 10 false 10F 2.5,3.271 2.813,3.469 0.313,0.198 10 false I85 4.823,3.26 5.135,3.458 0.313,0.198 10 false I86 1.865,4.625 2.177,4.823 0.313,0.198 10 false 10E 1.292,6.208 1.667,6.406 0.375,0.198 10 false 10G 3.177,6.177 3.49,6.375 0.313,0.198 10 false 10A 4.365,6.188 4.729,6.375 0.365,0.188 10 false 10C 5.385,6.188 5.698,6.385 0.313,0.198 10 false 10B 6.385,6.177 6.698,6.375 0.313,0.198 10 false 10D 5.49,4.615 5.927,4.792 0.438,0.177 10 false 10F 6.313,1.76 6.667,1.958 0.354,0.198 10 false 10E 0.313,1.531 0.625,1.729 0.313,0.198 10 false 10A 0.313,1.792 0.625,1.99 0.313,0.198 10 false 10C 0.323,2.021 0.635,2.219 0.313,0.198 10 false 10B 0.323,2.271 0.635,2.469 0.313,0.198 10 false 10D

a.

Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Connect the power distribution box assembly connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

Tester Connection Terminal Description Condition Specified Condition
MB-26 (BECU) - Body ground Auxiliary battery power supply Ignition switch off*1
Always*2 		11 to 14 V
MB-27 (IGR) - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
MB-13 (GND1) - Body ground Ground Always Below 1 Ω
MB-14 (GND2) - Body ground Ground Always Below 1 Ω
MB-2 (FLCY) - Body ground Front door courtesy light switch assembly (LH) input Front door LH closed 10 kΩ or higher
Front door LH open Below 1 Ω
MB-4 (FRCY) - Body ground Front door courtesy light switch assembly (RH) input Front door RH closed 10 kΩ or higher
Front door RH open Below 1 Ω
MB-6 (LCTY) - Body ground Rear door courtesy light switch assembly (LH) input Rear door LH closed 10 kΩ or higher
Rear door LH open Below 1 Ω
MB-1 (RCTY) - Body ground Rear door courtesy light switch assembly (RH) input Rear door RH closed 10 kΩ or higher
Rear door RH open Below 1 Ω
MB-19 (LGCY) - Body ground Luggage compartment door courtesy light switch signal Luggage compartment door closed (OFF) → open (ON) 10 kΩ or higher → Below 1 Ω
I85-27 (HCTY) - Body ground Engine hood courtesy switch input signal Engine hood open (OFF) → closed (ON) 10 kΩ or higher → Below 1 Ω

*1: for HV Model

*2: for Gasoline Model



d.

Install the main body ECU (multiplex network body ECU) to the power distribution box assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Tester Connection Terminal Description Condition Specified Condition
I85-9 (LSFL) - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
Front door LH locked Pulse generation
I85-3 (LSFR) - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
Front door RH locked Pulse generation
I85-10 (LSWL) - Body ground Rear door LH unlock detection switch input Rear door LH unlocked Below 1 V
Rear door LH locked Pulse generation
I86-23 (LSWR) - Body ground Rear door RH unlock detection switch input Rear door RH unlocked Below 1 V
Rear door RH locked Pulse generation
I85-28 (L2) - Body ground Driver door key-linked lock input Driver door key cylinder turned to lock position Below 1 V
Driver door key cylinder off Pulse generation
I85-4 (UL3) - Body ground Driver door key-linked unlock input Driver door key cylinder turned to unlock position Below 1 V
Driver door key cylinder off Pulse generation
10F-14 (SH) - Body ground Security horn drive Security horn sounding (Theft deterrent system is in alarm sounding state) Pulse generation (Below 1 V ←→ 11 to 14 V)
10A-10 (HORN) - Body ground Vehicle horn drive Vehicle horns sounding (Theft deterrent system is in alarm sounding state) Pulse generation (Below 1 V ←→ 11 to 14 V)
I85-7 (IND) - Body ground Security indicator illumination Security indicator light illuminated
(Theft deterrent system in alarm sounding state) 		Pulse generation → Below 2 V



CHECK COMBINATION METER ASSEMBLY


for 12.3 Inch Display: Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for 12.3 Inch Display)>TERMINALS OF ECU

except 12.3 Inch Display: Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (except 12.3 Inch Display)>TERMINALS OF ECU


CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Smart Entry and Start System)


Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM (for Entry Function (except NR Series))>TERMINALS OF ECU