RM3660EC
_51
Engine / Hybrid System
_080778
8ZR-FXE ENGINE CONTROL
_0392140
KNOCK SENSOR
A
8ZR-FXE ENGINE CONTROL KNOCK SENSOR INSTALLATION
PROCEDURE
89615
1.INSTALL KNOCK CONTROL SENSOR
- HINT:
-
Perform "Inspection After Repair" after replacing the knock control sensor.
a.
1.917,2.844 2.094,3.01
0.177,0.167
10
true
*a
1.823,4.26 2,4.427
0.177,0.167
10
true
*b
1.469,4.26 1.646,4.427
0.177,0.167
10
true
*b
| *a | Top |
| *b | 10° |
Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.
- Torque:
- 21 N*m (214 kgf*cm, 15 ft.*lbf)
- NOTICE:
-
Make sure that the knock control sensor is in the correct position.
b.
Connect the knock control sensor connector.
17111
2.INSTALL INTAKE MANIFOLD
3.PERFORM INITIALIZATION
a.
Perform "Inspection After Repair" after replacing the knock control sensor.