RM35X0E _56 Audio / Visual / Telematics _079315 PARK ASSIST / MONITORING _0385745 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Avoid any impact to the blind spot monitor sensor.

·

Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.



HINT:
·

The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitting radio waves.

·

The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using a reflector.

·

The blind spot monitor sensor installation condition inspection is performed to confirm whether the sensor is placed vertically to the ground (+/-2.2°) by using a jig, and that the sensor is 46 to 54° from the line parallel to the vehicle center line.



PROCEDURE

Hide 88171 1.INSTALL BLIND SPOT MONITOR BRACKET LH (for Double Swing Out Type)

a.
B650175

Install the blind spot monitor bracket LH with 3 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 88161 2.INSTALL BLIND SPOT MONITOR BRACKET RH (for Double Swing Out Type)

HINT:

Use the same procedure described for the LH side.


Hide 88172 3.INSTALL BLIND SPOT MONITOR SENSOR LH

a.

Connect the connector.

B650174C01
0.333,0.198 0.708,0.438 0.375,0.24 12 true *A 4.24,0.208 4.615,0.448 0.375,0.24 12 true *B 2.24,2.01 2.615,2.25 0.375,0.24 12 true *C
*A except Wagon *B for Wagon
*C for Double Swing Out Type - -
V100135

Nut
V100136

Connector



b.

Install the blind spot monitor sensor LH with 3 nuts.

NOTICE:

Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.


Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 88162 4.INSTALL BLIND SPOT MONITOR SENSOR RH

HINT:

Use the same procedure described for the LH side.


Hide 88173 5.INSTALL BLIND SPOT MONITOR COVER LH (w/ Blind Spot Monitor Cover)

a.
B552449

Install the blind spot monitor cover LH with 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 88163 6.INSTALL BLIND SPOT MONITOR COVER RH (w/ Blind Spot Monitor Cover)

HINT:

Use the same procedure described for the LH side.


Hide 10.PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SENSOR>ADJUSTMENT

SST
09870-60000  (09870-60010)
09870-60040