RM35X0E _56 Audio / Visual / Telematics _078380 TELEMATICS _0385046 TELEMATICS SYSTEM(for ERA-GLONASS) D

TELEMATICS  TELEMATICS SYSTEM(for ERA-GLONASS)  VEHICLE CONTROL HISTORY (RoB)  


NOTICE:

Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.


CHECK VEHICLE CONTROL HISTORY


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).

Body Electrical > Telematics > Utility
Tester Display
Vehicle Control History (RoB)
50005 459 55
Vehicle Control History Item
Code Tester Display Description Diagnostic Note
X2210 Life Cycle of DCM Backup Battery When the system detects that the mobilephone battery has reached the end of its lifespan.
·

The manual (SOS) switch red indicator illuminates

·

NOTICE:
·

After replacing the mobilephone battery, perform initialization.

(Click here)

·

After performing work, perform "CLEAR VEHICLE CONTROL HISTORY" to turn off the manual (SOS) switch red indicator.



X2211 Low DCM Backup Battery Charge When the mobile phone battery charge is low. -
X2601 Software Inconsistency with ENG/HV Control Module The VIN number received via CAN communication does not match that stored in the DCM.
·

The manual (SOS) switch red indicator illuminates

·

X2213 Emergency Call Switch Stuck On The manual (SOS) switch is on for 5 minutes or more
·

The manual (SOS) switch red indicator illuminates

·

X2214 Communication Blackout from Power Distribution Controller ECU Lost Communication with ECM. Check CAN Communication System
(Click here)
X2212 Diagnostics Communication Flow Failure Diagnostics communication flow failure (ID, Mode/SID difference). -
X2215 Non Approval of the Reprograming User did not approve software update. -
X2216 Failure of the Reprogramming Software writing failed. -
X2217 Inconsistent Startup Software Software writing succeeded, but started software does not match package. -



CLEAR VEHICLE CONTROL HISTORY


NOTICE:

By performing this procedure, all stored Vehicle Control History will be cleared.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).

Body Electrical > Telematics > Utility
Tester Display
Vehicle Control History (RoB)
50005 459 55

e.

According to the display on the GTS, clear the Vehicle Control History (RoB).