RM35X0E _56 Audio / Visual / Telematics _079315 PARK ASSIST / MONITORING _0385736 PARKING ASSIST MONITOR SYSTEM C

PARK ASSIST / MONITORING PARKING ASSIST MONITOR SYSTEM U1000 CAN Communication Failure (Message Registry)

DESCRIPTION

This DTC is stored when the television camera assembly judges that it has an internal CAN malfunction.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U1000	CAN Communication Failure (Message Registry)	CAN communication failure (message registry)	Television camera assembly

NOTICE:: ·

When the "!" mark is displayed on the radio and display receiver assembly after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>INITIALIZATION201902,999999,_56,_079315,_0385736,RM100000001GNRA,

·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION201902,999999,_56,_079315,_0385736,RM100000001GNRB,

1.CHECK FOR DTC

Clear the DTCs.

Recheck for DTCs and check that no DTCs are output.

HINT:: ·

If DTC U1000 is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.

·

If DTC U1000 is output frequently, duplicate the problem symptoms and perform the inspection again, even if the DTC was not output when rechecking for DTCs.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING201902,999999,_V1,_078841,_0386803,RM100000001GTWY,

Result:

Result	Proceed to
DTC U1000 is not output	A
DTC U1000 is output	B

USE SIMULATION METHOD TO CHECK

REPLACE TELEVISION CAMERA ASSEMBLY